Manual

15
2002 Top Dry Service School
*********************************************************************
SOFTWARE: SERIES 2000 AUTOFLOW HEATER BOARD
VERSION: 1.05
DATE CHANGED: DECEMBER,1999
RELEASE DATE: DECEMBER,1999
1.) Made a selection for diesel burner. Ignition relay
is pulsed on after burner starts to reset diesel module.
*********************************************************************
SOFTWARE: SERIES 2000 AUTOFLOW HEATER BOARD
VERSION: 1.04
RELEASE DATE: September, 1998
1.) Changed software so the ignitor comes on when the burner
initially attempts to light and then it goes off about
five seconds later and we try to sense flame then.
*********************************************************************
SOFTWARE: SERIES 2000 AUTOFLOW HEATER BOARD
VERSION: 1.03
RELEASE DATE: Jan, 1998
1.) Fixed software so that if slave loses contact with
master everything shuts down accordingly.
*********************************************************************
SOFTWARE: SERIES 2000 AUTOFLOW HEATER BOARD
VERSION: 1.02
RELEASE DATE: DECEMBER 17, 1997
1.) The master now sends the plenum temperature differential
to the fan/heaters as a byte on the network.
*********************************************************************
SOFTWARE: SERIES 2000 AUTOFLOW HEATER BOARD
VERSION: 1.01
RELEASE DATE: DECEMBER 1997
1.) Changed software so plenum temperature decides which temperature
scale the heater software is on. This fixes a problem of the
plenum temperature going to 86F and stopping.
*********************************************************************
Software revisions