Manual

2002 Top Dry Service School

Diagnostic Mode

• Turn the Control Power “ off “.

• Hold down the Program Tempera-

ture switch.

• Turn the Control Power switch “on “

with the Program Temperature switch

held down.

• Press the Program Dry time switch to

engage the Fan Starter.

• Press the Program Temperature switch

to start theIgnitor.

• Press the Hours x 1000 switch to open

the Ssolenoid.

• Turn the control power “off” to exit

the Diagnostic mode.

CAUTION: DO NOT ATTEMPT BELOW PROCEDURE WITH GAS LINE CONNECTED.

Series 2000 Autoflow Fan / Heater

Software Diagnostics