Instruction Manual

EN - 20 -
BEFORE USING YOUR FRIDGE
General warnings
WARNING: Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means
to accelerate the defrosting process, other than those recom-
mended by the manufacturer.
WARNING: Do not use electrical appliances inside the food
storage compartments of the appliance, unless they are of the
type recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: In order to avoid any hazards resulting from the
instabilityoftheappliance,itmustbexedinaccordancewith
the following instructions:
WARNING: When positioning the appliance, ensure the
supply cord is not trapped or damaged.
WARNING: Do not locate multiple portable socket-outlets or
portable power supplies at the rear of the appliance.
If your appliance uses R600a as a refrigerant (this information
will be provided on the label of the cooler) you should take care
during transportation and installation to prevent the cooler
elements from being damaged. R600a is an environmentally
friendlyandnaturalgas,butitisexplosive.Intheeventofaleak
due to damage of the cooler elements, move your fridge away
fromopenamesorheatsourcesandventilatetheroomwhere
the appliance is located for a few minutes.
•While carrying and positioning the fridge, do not damage the
cooler gas circuit.
•Donotstoreexplosivesubstancessuchasaerosolcanswith
aammablepropellantinthisappliance.
•This appliance is intended to be used in household and
domestic applications such as: