Installation Guide

Grandeur Long Plate Drilling Template
(Scale 1 to 1[full size])
(1) Locate the hole locations for your long plate on this template.
(FAV = Fifth Ave., GVC = Grande Victorian, PAR = Parthenon,
WIN = Windsor)
(2) Place drilling template on your door, centering the 2 1/8”
cross-bore hole. Keep template parallel with door edge.
(3) Mark the hole locations for your long plate on the door.
(4) Drill holes using a 7/64” diameter drill bit. Then go to step E on
the installation instructions.
DOOR EDGE: 2-3/4” from center of cross bore DOOR EDGE: 2-3/8” from center of cross bore DOOR EDGE: 2-3/8” from center of cross bore DOOR EDGE: 2-3/4” from center of cross bore
Be sure to
DETERMINE
LOCK
LOCATION
(previous page)
Attach the silver mounting posts to the back
of the outside half with a at blade screwdriver.
Insert the latch.
Left Hand Door
(Outside)
Grandeur Long Plate Drilling Template
(Scale 1 to 1[full size])
(1) Locate the hole locations for your long plate on this template.
(FAV = Fifth Ave., GVC = Grande Victorian, PAR = Parthenon,
WIN = Windsor)
(2) Place drilling template on your door, centering the 2 1/8”
cross-bore hole. Keep template parallel with door edge.
(3) Mark the hole locations for your long plate on the door.
(4) Drill holes using a 7/64” diameter drill bit. Then go to step E on
the installation instructions.
DOOR EDGE: 2-3/4” from center of cross bore DOOR EDGE: 2-3/8” from center of cross bore DOOR EDGE: 2-3/8” from center of cross bore DOOR EDGE: 2-3/4” from center of cross bore
To drill the mounting holes, refer to
the template on the opposite page.
Emergency Release Hole
(Privacy Only)
Attach outside half to door.
Left Hand Door
(Outside)
Mounting Plate
Emergency Release Hole
(Privacy Only)
Left Hand Door
(Outside)
(1) Hold mounting plate against the inside of the door.
Insert 1-1/4” long machine screws through mounting plate into silver posts on
outside half, and tighten. (2) Insert 1” long wood screws in outside half.
(1)
(2)
(Inside)
Attach the short gold mounting posts to
the back of the inside half.
Emergency Release Hole
(Privacy Only)
Left Hand Door
(Outside)
(1) Push inside half onto mounting plate at an angle.
(2) Rotate inside half clockwise to lock in place.
(1)
(2)
(Inside)
(1) Insert 1” long wood screws into inside half.
(2) Insert privacy pin (Privacy Only).
Emergency Release Hole
(Privacy Only)
Left Hand Door
(Outside)
(1)
(1)
(2)
(Inside)
Door Jamb
Attach the strike plate to the door jamb
using 1” long wood screws.
Passage/Privacy
Long Plate Door Hardware
Installation Instructions
Updated August 2017
PK144 08242017
For assistance call 1-844-372-6848 Monday through Friday, 7 am to 5 pm Mountain Time or visit www.GrandeurHardware.com/support
Fits doors
1-3/8” to 2” thick