Instructions / Assembly

EN
Safety Information
WARNING
Risk of Fire or Electric Shock
Disconnect power at the circuit breaker(s) or disconnect switch(es) before installing or servicing.
Installation and/or wiring must be in accordance with national and local electrical code requirements.
Use supply wires 14-12 AWG, rated 75°C minimum – COPPER conductors ONLY.
KEEP DOOR CLOSED AT ALL TIMES when not servicing.
Please note:
National regulations and safety regulations
Guarantee is invalidated if you tamper with the device or modify it
Minimum diameter of the exible lines for the connecting terminals: 1 mm
2
Maximum diameter of the exible lines for the connecting terminals: 2.5 mm
2
Read this manual and pay attention to its contents to ensure that the device works perfectly and that you
can work safely with it.
44