Instructions / Assembly

1. Press the

button:

2. Select

Program

and conrm

with

OK.

For clarication of the following action steps, see ow chart.

3. Select

New

and conrm with

4. In step

With Date?

,specify whether the device is to be activated on a certain date and - if yes -

conrm with

(also refer to Seite 52).

5. Select

Impulse

and conrm with

6. Enter hour and minute of the start time (+/-) and conrm each with

NOTE: The data for sunrise and sunset should be considered in connection with the astro-variant.

The choice of these parameters is between 11 p.m. and midnight.

7. Enter hour(s), minute(s) and second(s) of the impulse duration (+/-) and conrm each with

8. Set the weekday(s) (+/-) to which the switching time should apply, and conrm with

NOTE: The weekdays 1-5, 6-7 and 1-7 are preset. Individual weekdays can be set (+/-) under

"Select days".

9. Select channel

(1)

(+/-) for which the impulse should be set, and conrm with

NOTE: The plus sign stands for active, the minus sign for an inactive channel.

10. Select

YES

to create an additional switching command or select

to determine the possible

priority

(2)

(1)

The channel selection is only available with 2-channel timers

(2)

The choice of priority is only possible in advanced mode; refer to „Dening prioritisation of programs“

auf Seite 61.