Instructions / Assembly

EN
E
Random programming
Programm
OK
Neu
OK
Mit Datum?
Ja / Nein
OK
Menü
Menu
Program
New
With Date?
Yes/No
FKT wählen
Zufall EIN
OK
Zeit
15:00
Stunde ...
OK
Zeitraum
+02:00
Stunde ...
OK
Tage
12345--
Mo–Fr
OK
Select FNC
Random ON/
Time
15:00
Hour
Offset
+02:00
Hour ...
Days
12345--
Mo-Fr
Kanäle
(1)
1 –
CH1
OK
Weitere Schaltzeit
Ja/Nein
OK
Priorität
(2)
Niedrig
OK
Channels
(1)
1 –
CH1
Add Time?
Yes/No
Priority
(2)
Low
Random programming is possible only in advanced mode.
Example: Random  15:00  +02:00  1 2 3 4 5  1
Channel 1 is switched on Monday to Friday between 15:00 and 17:00. The exact switch-on time point is
random in this range.
1. Press the
Menu button:
2. Select
Program and conrm with OK.
For clarication of the following action steps, see ow chart.
3. Select
New and conrm with OK .
4. In step
With date determine whether the device should be activated on a certain date and - if
yes - conrm with
OK (also refer to Seite 52).
5. Select
Random ON or Random OFF and conrm with OK .
NOTE: The period of the random switching is dened with ± 2 hours.
6. Enter hour and minute of the start (+/-) and conrm each with
OK .
7. Enter hour and minute of the range of the random programming (+/-) and conrm each with
OK .
8. Set weekday on which the device should randomly switch and conrm with
OK . NOTE: The weekdays
1-5, 6-7 and 1-7 are preset. Individual weekdays can be set (+/-) under "Select days".
9. Set the channel
(1)
which is to be programmed, and conrm with OK .
NOTE: The plus sign stands for active, the minus sign for an inactive channel.
10. And choose possible
Priority
(2)
.
(1)
The channel selection is only available with 2-channel timers.
(2)
The choice of priority is only possible in advanced mode; refer to „Dening prioritisation of programs“
auf Seite 61.
60