Instructions for Use

Deutsch

94002 GM-Racing XG-6i 2.0 FHSS Sport Spec 16

STEERING DUAL RATE (ST.D/R)

Steering Dual Rate is used to change the action of steering servo when turning the steering

wheel. The default setting is 100%. The adjusting value range is 20% - 120%.

Setting

1. Press INC-Button, the ST.DR-LED ﬂ ash green, showing the value of the steering servo is

increased. When LED appears all along red, ST.D/R reaches maximum value.

2. Press DEC-Button, the ST.DR-LED ﬂ ash in green, showing the value of the steering servo

is decreased. When LED appears all along red, ST.D/R reaches maximum value.

3. The ST.DR-LED appears red, showing that exactly 20%, 100% and 120% is selected,

otherwise the LED disappear.s after adjusting.

Note:

Keeping both INC and DEC-Button pressed, the transmitter will reset. TH/ST Trim will

go to neutral, Steering Dual Rate (ST.D/R) returns to default volume. Also the failsafe setting

will be reset.

ST.D/R-

buttons

left

right

FAILSAFE FUNCTION

Die XG-6i 2.0 FHSS is equipped with a failsafe function. In case of signal loss or empty trans-

mitter batteries the throttle and steering servo will go in a preset position to avoid damage to

the model. The throttle position is adjustable, we recommend to preset the brake position for

gas cars, electric cars also brake position or neutral.

Gas Car Brake Position

Electric Car Brake Position

Setting

1. Make sure the transmitter-/receiver power is enough.

2. Put the throttle trigger in the desired position (full brake), keep the „F/S“-button till „ST.

D/R“-LED ﬂ ash.

3. Then release „F/S“-button, Failsafe is set.

English

FLASH