Installation Guide

SOFFITS/TERMINATION
OPTION 1

When using Kleer Konceal Trim, shims maybe required to correctly position the siding
panel projection to the wall when custom trimming panel/s is required. Shim thickness
depends on location of custom trimming of the panel/s (Fig 8).

Face nail Grayne Panel into shim.
OPTION 2

Place a trim/fascia board over the installed shingles. This is typically called “capping”.
A wood spacer is sometimes needed behind the fascia trim for a proper ush setting,
as is the case with gables (Fig 9).
9
Use Cortex Screws
or nail trim into
structure
Kleer Konceal Trimboard
Shim block required when
custom trimming panels along
sill or headers
Custom trimmed Grayne panel
Spacer
Kleer Konceal Trimboard
Grayne Panel
FIGURE 8
FIGURE 9