User Manual
7
ASSEMBLE THE FUSELAGE
Install the Main Landing Gear
❏
❏
1. Insert a 2mm axle through the right main landing
gear. Secure the axle to the landing gear with a 4 mm lock
nut. Note: the front of the main landing gear sweeps forward.
❏
❏
2. Install a 2 mm wheel collar on the axle, then the foam
main wheel, followed by a second 2 mm wheel collar. Apply
a drop of thread locker on the 3 mm set screws and secure
the wheel collars on the axle with the set screws.
❏
❏
3. Position the right wheel pant over the wheel and
secure it to the main landing gear with two 2 × 5 mm self
tapping screws.
❏
❏
4. Attach the main landing gear to the fuselage with
three 2.5 ×8mm self tapping screws.
❏
5. Repeat steps 1– 4 for the left main landing gear.
Install the Stabilizer
❏
1. Attach the wing to the fuselage with two 3 ×18 mm wing
bolts and two 3 mm fl at washers.