User Manual

We provide several places to mount your radio equipment
based on the engine type. The servo extension lead lengths
we recommend will allow you to mount your radio in all of the
positions suggested in this manual. If you know that your radio
equipment is to be mounted in the aft equipment tray, you may
choose shorter servo leads for the tail and eliminate the 6"
[152mm] leads we recommend for the inboard aileron servos.
❏ 6-channel computer radio system (5ch w/ mixing min)
❏ (7) Futaba S9155 servos for fl ight controls (FUTM0215)
–OR– min 150 oz-in [11 kg-cm] torque metal gear
standard servos
❏ (1) Futaba S3004 standard servo for throttle (FUTM0004)
❏ (2) 6" HD extensions (ails inboard) (HCAM2000)
❏ (2) 24" HD extensions (ailerons) (HCAM2200)
❏ (3) 36" HD extensions (tail servos) (HCAM2726)
❏ (2) Y-harness HD digital (FUTM4135)
❏ 4200mAh 4.8V battery (HCAM6335) –OR– 4200mAh 6V
battery (HCAM6355)
❏ Pro HD switch harness Futaba J (HCAM2761)
❏ Ernst charge jack Futaba J (ERNM3001)
ADDITIONAL ITEMS REQUIRED
In order to fi nish your Reactor, you will need:
❏ (7) Great Planes large scale 1.5" single-side servo arm
(GPMM1105)
❏ Dubro #4 plastic washers (for cowl) (DUBQ3240)
❏ R/C foam rubber 1/4" [6mm] (HCAQ1000)
Adhesives & Building Supplies
❏ 21st Century
®
sealing iron (COVR2700)
❏ 21st Century iron cover (COVR2702)
❏ Drill bits: 1/16" [1.6mm], 5/64" [2mm], 3/32" [2.4mm],
5/32" [4mm], 3/16" [4.8mm], 1/4" [6.4mm],
9/32" [7.1mm]
❏ 1 oz. [30g] Medium Pro
™
CA+ (GPMR6008)
❏ 1 oz. [30g] Thin Pro CA (GPMR6002)
❏ CA applicator tips (HCAR3780)
❏ CA debonder (GPMR6039)
❏ Pro 30-minute epoxy (GPMR6047)
❏ Epoxy brushes (6, GPMR8060)
❏ Mixing sticks (50, GPMR8055)
❏ Mixing cups (GPMR8056)
❏ Builder’s triangle set (HCAR0480) –OR– metal template
set (30/60/90 and 45° triangles, HCAR0500)
❏ Threadlocker
™
threadlocking compound (GPMR6060)
❏ Hobby Heat
™
micro torch (HCAR0755)
❏ Silver solder w/fl ux (STAR2000)
❏ Panel Line Pen (TOPQ2510)
❏ 18" [457mm] Flexible steel ruler (HCAR0460)
❏ Hobbico retractable fabric tape measure (HCAR0478)
❏ Rotary tool such as Dremel
®
❏ Rotary tool reinforced cut-off wheel (GPMR8200)
❏ 8-32 Tap and drill set (GPMR8103)
❏ Tap handle (GPMR8120)
❏ Pliers with wire cutter (HCAR0625)
❏ Hobbico heavy-duty diagonal cutter 7" (HCAR0627)
❏ Electric drill
❏ Hobbico ball-end hex wrench set – metric (HCAR0521)
❏ Hobbico ball-end hex wrench set – SAE (HCAR0520)
❏ Ratchet with #1 Phillips bit & 1/4" [6mm] socket
❏ Center punch –OR– scratch awl
❏ (2) 1" [25mm] C-clamps
❏ Masking tape (TOPR8018)
❏ Medium T-pins (100, HCAR5150)
❏ Great Planes Easy-Touch
™
hand sander
5-1/2" [140mm] (GPMR6169)
❏ Sandpaper assortment
❏ 3M
®
green Scotch-Brite
™
abrasive pad
❏ Electrical tape
❏ Toothpicks, round
❏ Petroleum jelly
❏ Denatured alcohol (for epoxy clean up)
Optional Supplies & Tools
❏ Robart Super Stand II (ROBP1402)
❏ C.G. Machine
™
(GPMR2400)
❏ 36" [914mm] Metal ruler (HCAR0475)
❏ Hobbico Builder’s Protractor (HCAR0490)
❏ Great Planes 4-in-1 Tool (GPMR8035)
❏ Precision Magnetic Prop Balancer (TOPQ5700)
❏ 1" [25mm] Double-sided foam mounting tape (GPMQ4442)
❏ Hobby saw & handle (ZONR2060)
❏ Stick-on segmented lead weights (GPMQ4485)
❏ 38% Extra 330S Pilot Figure (GPMA3207)
❏ R/C-56 Glue 4oz (JOZR5007)
ORDERING REPLACEMENT PARTS
Replacement parts for the Great Planes 1.60 – 50cc
Reactor 3D ARF are available using the order numbers in
the Replacement Parts List that follows. The fastest, most
economical service can be provided by your hobby dealer or
mail-order company.
To locate a hobby dealer, visit the Hobbico web site at
www.hobbico.com. Choose “Where to Buy” at the
bottom of the menu on the left side of the page. Follow the
instructions provided on the page to locate a U.S., Canadian
or International dealer.
Parts may also be ordered directly from Hobby Services by
calling [phone], or via facsimile at [phone],
but full retail prices and shipping and handling charges will
apply. Illinois and Nevada residents will also be charged
sales tax. If ordering via fax, include a Visa
®
or MasterCard
®
number and expiration date for payment.
4