SDS

Product name: GREAT STUFF™ Big Gap Filler Insulating Foam
Sealant 12oz HC ES SASTW 12ct
Issue Date: 06/07/2018
Page 8 of 19
Lower explosion limit
No test data available
Upper explosion limit
No test data available
Vapor Pressure
1,151 kPa at 55 °C (131 °F) Calculated.
Relative Vapor Density (air = 1)
No test data available
Relative Density (water = 1)
1.06 Estimated.
Water solubility
Insoluble
Partition coefficient: n-
octanol/water
No data available
Auto-ignition temperature
No test data available
Decomposition temperature
No test data available
Kinematic Viscosity
Not applicable
Explosive properties
Not explosive
Oxidizing properties
No
Molecular weight
No test data available
NOTE: The physical data presented above are typical values and should not be construed as a
specification.
10. STABILITY AND REACTIVITY
Reactivity: No data available
Chemical stability: Stable under recommended storage conditions. See Storage, Section 7.
Unstable at elevated temperatures.
Possibility of hazardous reactions: Can occur. Exposure to elevated temperatures can cause
product to decompose and generate gas. This can cause pressure build-up and/or rupturing of closed
containers. Acids.
Conditions to avoid: Avoid temperatures above 50 °C
Elevated temperatures can cause container to vent and/or rupture. Exposure to elevated
temperatures can cause product to decompose.
Incompatible materials: Avoid contact with: Acids. Alcohols. Amines. Ammonia. Bases. Metal
compounds. Strong oxidizers. Products based on diisocyanates like TDI and MDI react with many
materials to release heat. The reaction rate increases with temperature as well as with increased
contact; these reactions can become violent. Contact is increased by stirring or if the other material
acts as a solvent. Products based on diisocyanates such as TDI and MDI are not soluble in water and
will sink to the bottom, but react slowly at the interface. The reaction forms carbon dioxide gas and a
layer of solid polyurea. Reaction with water will generate carbon dioxide and heat.
Hazardous decomposition products: Decomposition products depend upon temperature, air supply
and the presence of other materials. Toxic gases are released during decomposition.
11. TOXICOLOGICAL INFORMATION
Toxicological information appears in this section when such data is available.