User Guide

Section 2
Placing And Receiving Calls 41
• Using Call History
To See Recent Calls
• Using Voice Dial
• Setting Up Voice Mail
• Changing Your Voice Mail Greeting
• When To Check Your Voice Mail
Messages
• Listening To Voice Mail Messages
• Listening To Saved Voice Mail
Messages
• International Dialing
Placing A Call
You can dial a phone number directly from almost every screen on your Jitterbug.
1. When you open your Jitterbug, you will hear a dial tone to indicate that service is
available. If service is not available, there will be no dial tone and you will see “No
Service” on the Inside Display.
2. Dial the full ten-digit number using your keypad. You may be required to dial
the number “1” rst before placing a call in some areas.
3. Press the button to place the call.
If you accidentally press a wrong button, press the button to back up and
delete the last number.