Instruction Manual

Label Qty. Description Part Number
A 1 Pro Dry S Air Filter TF-9011D
B 1 Intake Tube 05-T1004P2
C 1 Hose, 5/8" (18.5") 05-00069
D 1 Hose, 1/2" (16") 05-00027
E 1 Hose, 5/16" (12") 05-00112
F 1 Coupling, Elbow 05-00116
G 1 Hose, 1/2" (3") 05-00027
H 1 Clamp, 048 03-50007
I 1 Clamp, 044 03-50019
J 2 Clamp, Mini 006 03-50025
K 2 Clamp, Mini 004 03-50097
L 1 Washer, M6 Lg 03-50074
M 1 Isolation Mount, M6 03-50022
N 1 Nut, M6 03-50059
O 2 Screw, M4 03-50034
Installation will require the following tools:
8mm & 10mm Socket or Wrench, Ratchet w/Extension, Phillips Screwdriver, Flat-Head Screwdriver,
5/16” Nut Driver, Pliers
Note: Legal in California for use on race vehicles only. The use of this device on vehicles used on public streets or
highways is strictly prohibited in California and others states that have adopted California emission regulations.
• Please read the entire instruction manual before proceeding.
• Ensure all components listed are present.
• If you are missing any of the components, call customer support at 951-493-7100
• Ensure you have all necessary tools before proceeding.
• Do not attempt to work on your vehicle when the engine is hot.
• Disconnect the negative battery terminal before proceeding.
Page 2