Operating Instructions and Installation Instructions

Clean and Maintenance

WARNING:

may lead to electric shock.

Otherwise it will damage unit's appearance.

1. Grille and Case

To clean the case:

When there is dust on the case, use soft towel

to dust it off; When the case is very dirty(greasy),

use mild detergent to clean it.

To clean the grille:Use a dust catcher or brush.

2. Water Bucket

Every few weeks, clean the bucket to prevent growth of mold, mildew and

bacteria. Use soft brush to clean the bucket and then rinse it.

To remove:

(1) Direct the rotor shaft of handle to the hole of buckle plate. Pull the bucket

plate at the handle side by following the arrow direction. Remove the

handle. (shown in Fig.1)

(2) Press down 4 buckles around the water bucket. Lift up the drain lid.

(shown in Fig.2)

Buckle

Drain Lid

Buckle

Handle

Buckle Plate

Hole of Buckle Plate

Rotor Shaft

of Handle

Fig. 1

Fig. 2