User Manual

Installation Procedure

Step 8:

To secure lower sash in place, attach right angle sash lock with screw as shown

(FIG.11).

NOTE: It is difficult to lock the windows with the sash lock for Vinyl-Clad windows,

so you can use lock by window itself.

Step 9:

Cut the sealing strip into the length same to the width of window. Plug the sealing

strip between glasses and window to prevent rain and insects getting into the

room. (FIG. 12).

Note: If sealing strip is not proper to your window, you can select other proper to

replace it.

FIG. 11

FIG. 12

Sealing strip

( without adhesive)

NOTE:

Before driving the screws, use a drill to drill 5 holes through the holes in the frame

lock and frame extensions into the windows sash as shown (FIG.10B).

FIG. 10A FIG. 10B