User Manual

Installation Procedure

FIG. 13B

OUTSIDE

INSIDE OUTSIDE

Bottom Rail

Wooden Window Vinyl-Clad Window

FIG. 14

* Turn the air conditioner off, and disconnect

Step 10:

Check that air conditioner is tilted back about 1/4” to 1/2” (tilted about 2° to 4°

downward to the outside, see FIG. 13A & FIG. 13B). After proper installation,

condensate should not drain from the overflow drain hole during normal use,

correct the slope otherwise.

FIG. 13A

INSIDE

about

Step 11:

Trim the weather seal with a proper length peel

off the protective backing and plug any gaps if

needed as shown FIG. 14.

Removing the air conditioner From Window

power cord.

Remove sash seal from between windows,

and unscrew sash lock.

Remove screws installed through frame and

frame lock.

Close (slide) side panels into frame.

Keeping a firm grip on air conditioner, raise sash and carefully remove.Be

careful not to spill any condensate water while liftingunit from window.Store

parts WITH air conditioner.