User Manual

1
Replacement of Batteries in Remote Controller
1. Press the mark “ ” on back cover of batteries box cover
for remote controller with fingers as shown in the fig, and then
remove the batteries box cover along the arrow direction.
Battery
Cover of battery box
Remove
Reinstall
2. Replace with two #7 (AAA 1.5V) dry batteries.
Make sure positions for “+” pole and “-” pole are
correct.
3. Reinstall batteries box cover.
 The distance between signal sender and receiving
window should be no more than 8m, and there should
be no obstacles between them.

conditioner when using the remote controller.
 Replace new batteries of the same model when
replacement is required.
 When you don’t use remote controller for a long
time, please take out the batteries.
NOTICE
Air Conditioner Use