Installation Guide

Install Ground Pad or Wall Hangers

1. Determine proper location for outdoor unit.

2. Follow all instructions provided by manufacturer for installing wall hangers or ground pad.

3. Verify the wall hangers or ground pad can safely support the weight of the outdoor unit.

4. Verify the wall hangers or ground pad is level and meets all outdoor dimensional clearances.

Install Outdoor Unit Risers

If the outdoor unit requires added elevation above the ground, installing riser legs will provide

a sturdy and stable solution. Follow all instructions provided by manufacturer for installing

riser legs to outdoor unit.

NOTE: Riser legs will also help absorb vibrations and noise while facilitating proper drainage.

Install Condensate Drain for Outdoor Unit

During normal heating and defrost operation,

the outdoor unit will generate condensate water.

The condensate water should be routed to a safe

location through the drain hose.

1. Locate drain hole on bottom of outdoor unit.

2. Install the outdoor drain fitting into hole on

the bottom of outdoor unit as shown.

3. Connect the drain hose to drain fitting.

4. Route drain hose to safe location for proper

drainage of excess condensate water.

5. Plug the remaining drain holes in basepan with

plugs provided from factory.

OUTDOOR UNIT INSTALLATION

Drain Fitting Installation