Instructions / Assembly

Chimney Cap: Always leave the cap
open. Your grill needs to draft.
Controller: Your controller is a
state-of-the-art PID (calculus-based)
computer that will keep your grill at a
reasonably steady temperature.
Hopper Lid: Keep the hopper lid
closed at all times while your grill is on.
Obviously, if you need to refill the
hopper, you can make a brief
exception. The fan inside the hopper
must blow air into the auger tube to
prevent burn-back from the firepot. If
the hopper lid stays open, this air
pressure just escapes into the
atmosphere.
Many of our dealers preassemble the grills, so this
section will not apply to you in that case.
If you bought your grill unassembled, then you may
use this manual to help you put your grill together. Or
if you’re a visual learner check out our Assembly &
Setup section on our videos page:
www.greenmountaingrills.com/videos
INSTALL THE LEGS
INSTALL THE CHIMNEY
REVERSE THE HANDLE
INSERT THE PARTS
TOOLS NEEDED:
10 mm wrench or socket
ASSEMBLY
51 52
Key Grill Components - DC
Davy Crockett Assembly