Instructions / Assembly

Pro Tips:
Multi-Grill Mode
If you have more than one
grill with WiFi, you can
control each grill
separately. You will need
to connect to each grill
separately and connect
them to your local WiFi
following the steps in
single-grill mode.
Next, follow these steps:
Single-grill mode
connects immediately to
the first grill it finds. By
default the app starts in
single-grill mode because
it is the most common
configuration.
Multi-grill mode extends
these steps a little longer
than normal to allow it to
find every available grill on
the network.
To disconnect from
server mode:
Go to the Settings tab.
Click the Leave Server
button.
The grill should be set
back to WiFi mode. To
reconnect to the grill,
press Connect on the
Home screen.
Connecting to the Server
1. You must have firmware version 1.2 or higher to use
server mode. See page 102 for instructions on checking your
firmware. For instructions on updating your firmware, see
page 104.
2. Make sure your Android or iOS app is up to date.
3. For safety reasons, you can only turn on the grill using
server mode if you are within range of your WiFi network.
In some situations, the grill will go back to point-to-point
mode. If this happens, repeat the WiFi connection process.
See page 107 for details.
Happy Grilling!
115 116
Smart Control App Guide