Specification

2
Fixture Mount PIR High Bay/Low Bay Dimming Occupancy Sensor
www.eaton.com/lightingsystems
Technical Data
March 2018
Product Data (Features Cont.)
Auto Calibration: Set to auto-calibration, photocell measures
lowest light level of facility with all lights ON for 24 hours to
determine the Daylighting Set Point
Performance Daylighting: Enhanced design algorithms to assure
lights will not cycle during cloud cover, or varying light levels
Fast and Simple Setting: Does not require power to set the time
delay saving valuable time during installation (Load = 30s-30m)
Fast and Simple Testing: The sensor will “instant on” within
5 seconds. Upon initial power, relay is closed enabling labor
savings testing in seconds
Fast, Simple Installation: Easily installs on individual fixtures
using standard 1/2” knockouts and the quicksnap feature which
eliminates the time to tighten the lock-nut. The 21” wire leads
reduce time and materials for connecting the ballast. Simply make
the electrical connections inside the ballast compartment, install
the appropriate adjustable lens assembly included, and the sensor
is ready. Masking is provided for fine tuning the coverage pattern
to specific needs. Ideal for use in food processing, warehouses,
manufacturing, cold storage and other high ceilings
Zero Crossing Circuitry: Relay uses a zero crossing circuitry to
provide reliable, long-life operation
Range and Coverage: The 360° high-bay PIR lens provides a
1.5:1 spacing to mounting height coverage for 21-40 ft mounting.
The 360° low-bay lens provides 2:1 spacing to mounting height
coverage for 13-20 ft mountin
LED Indicator: Multi-color LED indicates occupancy detection and
product function
False Detection Protection: Energy saving technology is designed
into the OEF-P to ensure your lights are on only when needed
Installation
The OEF-P installs directly to an industrial fluorescent fixture or an
electrical junction box through a standard 1/2” knockout using the
provided lock-nut. Wiring is connected inside the fixture body. The
sensor is installed in one of three 1/2” punch-outs, positioning the
OEF-P at the correct field-of-view position flush or below the fixture
reflector assembly.
Applications
Warehouses
Manufacturing
Indoor parking garages
Field-of-View
30 ft
30 ft 30 ft
30 ft
30 ft
40 ft
20 ft
20 ft 20 ft
20 ft
20 ft
10 ft
10 ft
10 ft
0
0
10 ft
0
30 ft
30 ft
20 ft
20 ft
10 ft
0
10 ft
20 ft
25 ft
8 f t
0
30 f t
20 f t 10 f t
0
10 f t 20 f t
30 f t
30 ft
30 f t 30 f t
30 ft
30 ft
40 ft
20 ft
20 f t 20 f t
20 ft
20 ft
10 ft
10 ft
10 f t
0
0
10 f t
0
S
H
E
L
V
E
S
S
H
E
L
V
E
S
High Bay
360 °
Top View
Side View
Low Bay
360 °
Top View
Side View
High Bay
Lens with
Aisle Mask
Side View