Specification Sheet

ManualsBrandsGreengate ManualsCommercial LightingVSW PIR Single Level 120V Wall Switch with Vacancy Sensor

Technical Data

Effective November 5, 2014

VSW-P – PIR/Single Level 120V

Vacancy Sensor (Ground Required)

Overview

The VSW-P-0801-120 Passive Infrared Single or 3-way Vacancy

Sensing Wall Switch is a motion sensing lighting control and

conventional wall switch all-in-one that is used to for energy savings

and convenience.

Features

Replaces single or 3-way switches

No neutral wire

Adjustable Time Delay

Integral daylight sensor

Manual On operation only

Works with incandescent, LED, fluorescent, CFL, MLV, ELV or

1/6 hp motor load

Catalog# Prepared by

Project Date

Comments Type

Technical Data

PIR

Activated

Reinforced color matched

tamper resistant lens

Summary of content (4 pages)

PAGE 1
Technical Data Effective November 5, 2014 VSW-P – PIR/Single Level 120V Vacancy Sensor (Ground Required) Catalog# Prepared by Project Date Comments Type Reinforced color matched tamper resistant lens Overview The VSW-P-0801-120 Passive Infrared Single or 3-way Vacancy Sensing Wall Switch is a motion sensing lighting control and conventional wall switch all-in-one that is used to for energy savings and convenience.
PAGE 2
Technical Data November 2014 VSW-P – PIR/Single Level 120V Vacancy Sensor (Ground Required) Specifications Technology Electrical Ratings (Per Relay) Coverage Light Level Sensing Operating Environment Housing Size Standards 2 Passive Infrared (PIR) 120 VAC: Incandescent/Tungsten – Max. load: 5A, 600W, 60 Hz LED/Compact Fluorescent/Ballast – Max. load: 5A, 600W, 60 Hz Motor Load: 1/6 HP @ 125 VAC Major motion - 450 sq. ft. Minor motion - 200 sq. ft.
PAGE 3
VSW-P – PIR/Single Level 120V Vacancy Sensor (Ground Required) Technical Data November 2014 Wiring Diagrams Single Level Switching SENSOR IN ONE LOCATION Hot Black Hot Black Ground Bare Green Output Red Neutral White Black 3-Way Blue Light Fixture Neutral White Three-Way Wiring Diagram SENSORS IN BOTH LOCATIONS Second Location First Location Black Traveler Red Traveler Hot Hot Black Black Output Black Red Ground Bare Black Hot Output Red Ground Green Bare Neutral 3-Way
PAGE 4
Technical Data VSW-P – PIR/Single Level 120V Vacancy Sensor (Ground Required) November 2014 Controls Fresnel Lens Light Levels & Time Delay Adjustments FIGURE 5: 20 3 0 TE S T 5 10 TURN TO SET ON/OFF Button LIGHT LEVEL Light Level & Time Delay Adjustments Ordering *Wallplate not included Catalog # Ratings VSW-P-0801-120-* (* - 0-600W incandescent, CFL, W, V, LA, G, B) MLV, ELV lighting load or 1/6 HP motor load Coverage Voltage 180°; 800 sq. ft.