Use and Care Manual

WARNING

• If parts of the machine are damaged, do not use the

machine.

• If you do not have all the parts, do not operate the

machine.

• If the parts are damaged or missing, contact the service

center.

1. Open the package.

2. Read the documentation in the box.

3. Remove all the unassembled parts from the box.

4. Remove the machine from the box.

5. Discard the box and package in compliance with local

regulations.

8.2 ATTACH THE GUARD

WARNING

Do not touch the cut-off blade.

1. Remove the screws from the trimmer head with the

supplied hex wrench.

2. Put the guard onto the trimmer head.

3. Align the screw holes on the guard with the screw holes

on the trimmer head.

4. Tighten the screws.

8.3 ASSEMBLE THE SHAFT

1. Loosen the screw on the coupler.

2. Push in the release button on the lower shaft (9).

3. Align the release button with the positioning hole and

slide the two shafts together.

Release button

Positioning hole

4. Turn the lower shaft until the button locks into the

positioning hole.

5. Tighten the screw with the hex wrench (13).

Hex screw

8.4 ATTACH THE AUXILIARY

HANDLE

1. Remove the knob (16) from the handle.

2. Attach the auxiliary handle and lower clamp (15) on the

shaft.

3. Set the auxiliary handle in the comfortable position.

4. Put the bolt (14) through the holes.

5. Tighten the auxiliary handle with the knob.

English