Owner's manual
5
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Make sure your extension cord is in good condition. When using an extension cord, be sure to
use one heavy enough to carry the current your product will draw. A wire gauge size (A.W.G.)
of at least 16 is recommended for an extension cord 50 feet or less in length. A cord exceeding
100 feet is not recommended. If in doubt, use the next heavier gauge. The smaller the gauge
number, the heavier the cord. An undersized cord will cause a drop in line voltage resulting in
loss of power and overheating.
be thrown or become entangled in cutting head.
Keep the air vents clean and free of debris to avoid overheating the motor. Clean after each
use.
Stop the unit and disconnect the power source when not in use. Carry the unit with the motor
stopped.
Store unplugged and out of the reach of children.
Do not hang unit so that the switch trigger is depressed.
Do not use multiple cords.
Do not abuse the cord. Never carry the unit by the extension cord or yank extension cord to
disconnect unit.
Keep the extension cord clear of operator and obstacles at all times. Do not expose cords to
heat, oil, water, or sharp edges.
If the power supply cord is damaged, it must be replaced only by the manufacturer or by an
authorized service center to avoid risk.
Save these instructions. Refer to them frequently and use them to instruct others who may use
this power tool. If you loan someone this power tool, loan them these instructions also.
W A R N I N G
Some dust created by power sanding, sawing, grinding, drilling, and other construction activi-
ties contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
Your risk from these exposures varies, depending on how often you do this type of work. To
reduce your exposure to these chemicals: work in a well ventilated area, and work with approved
particles.
.