Use and Care Manual

7.6 SET THE CUTTING HEIGHT

The machine can be set to different cutting heights.

1. Push the height adjustment button (6), move the height

adjust gear to a higher position to increase the cutting

height.

2. Push the height adjustment button, move the height adjust

gear to a lower position to decrease the cutting height.

7.7 INSTALL THE BATTERY PACK

WARNING

• If the battery pack or charger is damaged, replace the

battery pack or the charger.

• Stop the machine and wait until the engine stops before

you install or remove the battery pack.

• Read, know, and follow the instructions in the battery

and charger manual.

1. Open the battery door (7).

2. Align the lift ribs on the battery pack (13) with the

grooves in the battery compartment.

3. Push the battery pack into the battery compartment until

the battery pack locks into place.

4. When you hear a click, the battery pack is installed.

5. Close the battery door.

NOTE

The motor starts only when you put in the safety key (14).

7.8 REMOVE THE BATTERY PACK

1. Open the battery door (7).

2. Remove the safety key (14).

3. Push and hold the battery release button (15).

4. Remove the battery pack from the machine.

8 OPERATION

WARNING

Wear eye protection during operation.

8.1 START THE MACHINE

1. Put in the safety key.

2. Push and hold the start button (2).

English