Replacement Part List

-6-
Model G9744Z2 (Mfd. Since 10/13)
Parts Breakdown
337
354-7
222-3
217
208
B
A
212
218
B
214
200
211
206
A
C
B
212
213
216
215
C
221
207
202
201
205
204
222-5
B
A
A
345-3
220-5
220-4
220-3
220-2
220-6
220-1
355-1
G
302-2
F
304
305
303
209
219
210
301
302-1
300
302
H
314-4
314
313
312
314-3
318
317
310
309
308
307
316-1
311
316
360-1
357
355
356
368
362
361
366
367
360
359
358
H
314-1
314-2
363
354-10
354-3
F
371
G
369
370
354-4
354-5
364
365
345-4
328
330
329
333
332
334
330-1
E
331
321
223-1
222-6
224
226
225
222-1
222-2
222-4
320
324
306
315
315-1
306-1
323
314-6
314-5
326
327
353
322
325
319
342
351
335
343
352
345-1
345-2
345
336
350
348
349
340
341
374
372
373
375
376
354-8
354-6
377
354-2
354-9
354-1
338
339
309-1
K
L
134
133
354-11
220-7
354-12
620
623
624
625
MODEL G9744Z2
10" x 18"
METAL CUTTING BANDSAW
MOTOR: 1-1/2 HP, 220V, 1-PH, 1725 RPM
FULL-LOAD CURRENT RATING: 15.5A
BLADE SPEEDS: 114, 196, 288, 377 FPM
BLADE LENGTH: 121-1/2"
MAX. ROUND CUT AT 90°: 10"
MAX. RECT. WIDTH AT 90°: 18"
MAX. RECT. HEIGHT AT 90° (AT 18"W): 5"
ANGLE CUTS: 45˚ to 90˚
COOLANT CAPACITY: 1-1/2 GALLONS
WEIGHT: 705 LBS.
TO REDUCE THE RISK OF SERIOUS INJURY WHEN OPERATING THIS
MACHINE:
1. READ AND UNDERSTAND MANUAL BEFORE STARTING MACHINE.
2. ALWAYS WEAR EYE PROTECTION AND RESPIRATOR.
3. PLUG POWER CORD INTO GROUNDED OUTLET ONLY.
4. DO NOT USE UNTIL COMPLETELY ASSEMBLED, ADJUSTED AND
INSTALLED ACCORDING TO INSTRUCTIONS, AND ALL CONTROLS
ARE UNDERSTOOD.
5. NEVER POSITION FINGERS OR THUMBS IN LINE WITH CUT.
6. COMPLETELY SUPPORT WORKPIECE DURING WHEN CUTTING.
7. DO NOT WEAR LOOSE CLOTHING, GLOVES OR JEWELRY, AND
SECURE LONG HAIR TO AVOID ENTANGLEMENT INJURIES.
8. ALWAYS USE RECOMMENDED SPEEDS AND FEEDS FOR BLADE AND
WORKPIECE MATERIAL.
9. KEEP ALL GUARDS IN PLACE AT ALL TIMES.
10. DISCONNECT POWER BEFORE SETTING UP OR ADJUSTING.
11. DO NOT EXPOSE TO RAIN OR DAMPNESS.
12. DO NOT OPERATE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL.
220
222
354
338-1
338-2
338-5
338-3
338-7
338-4
338-6