Use and Care Manual

-32-
Model T28798 (Mfd. Since 01/20)
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
T28798
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
To reduce risk of circuit
overload or machine
electrical damage, only
operate collector with
filters installed.
CAUTION!
FIRE/EXPLOSION
HAZARD!
To minimize risk, ensure
machine is properly set
up, cleaned, and only
used to collect
non-combustible metals.
WARNING!
SHOCK
HAZARD!
Ensure machine is
properly grounded
to reduce static
electricity build up!
101
102
103
104
105
106
107
108
109
110
111
112
113
110
111
112
MODEL T28798
1.5 HP METAL DUST COLLECTOR
Motor: 1.5 HP, 240V, 1-Ph, 60 Hz
Full-Load Current Rating: 9A
Airflow: 650 CFM
Max Static Pressure: 10.8"
Inlet Size: 6"
Filter 1: 30-Micron, Stainless
Filter 2: 5-Micron, Active Carbon
Filter 3: 1-Micron, Pleated Micro
Max. Collection Capacity: 9.5 Gal.
Weight: 183 lbs.
Specifications
WARNING!
Mfd. for Grizzly in China
S/N
Date
To reduce the risk of serious injury or fire when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye and ear protection and a respirator during
operation, or when cleaning trays or filters.
3. Only connect with smooth-walled sheet metal ducting—do not use PVC.
4. Do not connect to any machine using a coolant system.
5. Entire collection system (collector + ductwork) must be bonded and
grounded to minimize static electrical charge.
6. Only collect a single type of metal/material at one time.
7. Do not use to collect niobium, tantalum, titanium, zirconium, or hafnium.
8. Never use machine to collect combustible or explosive metal dust, wood
chips, sawdust, or other ordinary combustible materials!
9. Always disconnect power before servicing or cleaning.
10. Empty collector and isolate ductwork before performing service/repairs.
11. Do not expose to rain or use in wet areas.
12. Do not use if cord, plug, or any other electrical equipment becomes
damaged—promptly repair!
13. Verify metals to be collected are not in a combustible or explosive form.
14. Do not modify machine in any way.
15. Remove collected dust/chips from dust tray at the end of each day.
Store in a closed-top metal container.
16. Know about and be prepared to safely fight a combustible metal fire.
17. Prevent unauthorized use by children or untrained users.
WARNING!
INJURY HAZARD!
To reduce risk of short
and long-term injury,
wear safety glasses,
hearing protection, and
a respirator when using
this machine.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call [phone] or
go to www.grizzly.com.
WARNING!
Labels & Cosmetics
REF PART # DESCRIPTION REF PART # DESCRIPTION
101 PT28798101 MODEL NUMBER LABEL 108 PT28798108 NOTICE FILTERS TAG
102 PT28798102 EXPLOSION HAZARD LABEL 109 PT28798109 DISCONNECT POWER LABEL
103 PT28798103 SHOCK HAZARD LABEL 110 PT28798110 EYE, EAR, LUNG LABEL
104 PT28798104 GRIZZLY NAMEPLATE, LARGE 111 PT28798111 MACHINE ID LABEL
105 PT28798105 GRIZZLY.COM LABEL 112 PT28798112 READ MANUAL LABEL
106 PT28798106 TOUCH-UP PAINT, PUTTY 113 PT28798113 ELECTRICITY LABEL
107 PT28798107 TOUCH-UP PAINT, GRIZZLY GREEN
Safety labels help reduce the risk of
serious injury caused by machine
hazards. If any label comes off or
becomes unreadable, the owner of
this machine MUST replace it in the
original location before resuming
operations. For replacements, contact
[phone] or www.grizzly.com.