Instructions

GB
104
A kickback is caused by wrongly or incor-
rectly operating the electric tool. It can be
avoided by suitable cautionary measures,
such as described below:
• Hold the saw rmly with both hands
with thumbs and ngers surround-
ing the chainsaw handles. Place
your body and arms in a position
where you can withstand the kick-
back forces. The user will be capable
of withstanding the kickback forces
if suitable measures are undertaken.
Never let go of the chainsaw.
• Avoid an abnormal body posture.
This will enable better control over the
chainsaw in unforeseen situations.
• Always use the replacement rails
and saw chains specied by the
manufacturer. Incorrect replacement
rails and saw chains can cause the
chain to break apart and/or may lead to
kickback.
• Comply with the manufacturer’s in-
structions for sharpening and main-
taining the saw chain. Depth limiters
placed too low increase the potential
for kickbacks.
• Do not saw with the tip of the blade
bar (see Fig� b)� There is a risk of kick-
back.
• Ensure there are no objects on the
ground which could cause you to
stumble�
• Long use of the equipment can re-
sult in vibration-related circulatory
disorders in the hands. However,
the length of use can be extended by
using suitable gloves or taking regular
breaks. Note that a personal tendency
for poor circulation, low outdoor tem-
peratures, or high gripping forces dur-
ing work will reduce the length of use.
RESIDUAL RISKS
Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Cuts
b) Ear damage if working without ear pro-
tection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Assembly
Pull out the power plug before car-
rying out any work on the equip-
ment.
Use only original parts.
Dismantling is carried out in re-
verse order.
Before operating the device, you need to
- Mount the pruner attachment,
- Mount the blade, saw chain and
sprocket cover, and align the chain,
- Pour in chain oil,
- Put the shoulder strap on
Use the tool provided in the scope of de-
livery for assembly.
Fitting/removing device
attachments
Fitting device attachments
1. Place the pruner attachment (10) onto
the telescopic tube (6).
2. Tighten the coupling nut (8) by hand
onto the threaded element.