Instructions
GB
106
The device is equipped with an automatic
as soon as the motor starts working.
• Regularly check the oil level using the
as necessary.
• Use Grizzly Tools bio-oil containing ad-
ditives to reduce friction and wear. You
can order this from our service centre.
• If Grizzly Tools bio-oil is not available,
use chain lubricating oil with a low pro-
portion of adhesion additives.
1. Unscrew the oil tank cap (11) and pour
the chain oil into the tank.
2. Wipe away any spilt oil and close the
oil tank cap again.
Attach the shoulder strap
Pulling the quick release (26)
releases the device quickly from
the carrying strap. To open the
together.
Attach the shoulder strap spring clip
( 25) to the carrying eyelet ( 4) on
the tubular shank of the device. Set the
strap length such that the spring clip on
the shoulder strap is roughly at the height
of your hip.
You can vary the strap length using the
buckle on the shoulder strap.
When wearing the shoulder strap,
ensure that the pad is placed on
your shoulders to increase comfort.
Switching on and off
1. Connect the device to the line voltage.
with your right hand on the operating
Initial start-up
Do not use the equipment with-
out the hand guard. Wear suit-
able clothing and work gloves
when working with the equip-
ment.
Ensure that the equipment is
functional before each use. The
On/O switch and the safety
switch must not be held closed.
They must switch o the motor
when on is released. Should a
switch be damaged, stop work-
ing with the equipment. Ensure
that the mains voltage value
matches the label on the equip-
ment.
regulations. Do not work during
general or mandatory rest periods.
• Check before starting:
- saw chain tension
- oil level
- that all nuts and screws are secure-
ly in place
• Ensure appropriate protective clothing
is worn.
• Set the working length of the telescopic
tube before turning the device on.
cover
• Put the shoulder strap on.
• Check you are standing securely.
• Check your working environment.
Pour in chain oil
The blade bar and saw chain must
never be operated without oil.
Non-observance causes increased
wear to the blade and saw chain.