Instructions

GB
110
5. Mount the blade bar, saw chain and
chain wheel cover and retighten the
-
ter).
When in an optimal condition, the
oil passages will automatically
spray the saw chain with a little oil
a few seconds after starting the
saw.
Service intervals
Carefully perform the maintenance tasks
listed in the following table on a regular
basis. Regular servicing of your unit will
extend the life of your equipment. Addi-
tionally, you will achieve optimum cutting
performance and prevent accidents.
Service intervals table
Machine part Action
Before each
use
After 10 hrs of
use
Complete ma-
chine
Check condition, replace dam-
aged parts as needed

Accessible
screws and
nuts
Tighten

Chain wheel Check, replace as needed

Saw chain Check, apply oil, reground or replace

Blade bar Check, rotate, clean, apply oil
 
Transport
• When moving to another location, en-
󰀨

󰀨
• Carry the device with the device at-
tachment facing backwards on the tel-
escopic tube.
• Place the protective covers (16) onto
the device when transporting or storing
it.
Storage
• Clean the device prior to storage.
• Place the protective covers (16) on.
• Always empty the oil tank before
pauses in operation lasting several
weeks because the bio chain oil can
become resinous and block the oil out-
let channel. Dispose of used oil in an
environmentally-responsible way (see
„Disposal/Environmental Protection“).
• Store the device in a dry, frost-free and
dust-protected location out of the reach
of children.
Disposal/environmental
protection
Dispose of waste oil in an environmentally
friendly way - take it to your local recycling
centre. Do not dispose of waste oil in the
sewer or your drain system.