Instructions

GB
112
Trouble Shooting
Problem Possible cause Fault correction
Device does not
start
Mains voltage not on
Check plug socket, cable, line
and plug, where appropriate,
have repaired through
electrical specialist
󰀨 3) defective
Repair by Service Centre
Worn carbon brushes
Defective motor
Device runs with
interruptions
Power cable is damaged
Check the cable and have it
changed by the Service Centre
if necessary
Internal loose electrical
connection
Repair by Service Centre
󰀨 3) defective
Saw is having
󰀩
󰀨
󰀩 Check chain tension
Chain gets hot,
smoke develops
while sawing,
the rail changes
colour
Too little chain oil

chain oil as needed
Check the oil automation and

as needed, or arrange for
repair by customer service
Bad cutting output
Saw chain ( 15) blunt
Sharpen or replace saw chain
(service centre)
󰀩 Check chain tension