IMPORTS, INC. BENCH GRINDER MODEL G1062 & MODEL G1063 INSTRUCTION MANUAL COPYRIGHT © 1994 BY GRIZZLY IMPORTS, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY IMPORTS, INC. NOVEMBER 1994. PRINTED IN USA DISCONTINUED MACHINE MANUAL DISCLAIMER THE INFORMATION IN THIS MANUAL REPRESENTS THE LAST CONFIGURATION OF THE MACHINE BEFORE IT WAS DISCONTINUED. MACHINE CONFIGURATIONS MAY HAVE CHANGED AS PRODUCT IMPROVEMENTS WERE INCORPORATED.
WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks, cement, and other masonry products. • Arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work.
TABLE OF CONTENTS I. PAGE INTRODUCTION ........................................................................................................1 II. COMMENTARY ..........................................................................................................1 III. SAFETY RULES FOR ALL TOOLS ..........................................................................2 IV. UNPACKING ..............................................................................................................4 V.
I. INTRODUCTION Grizzly Imports, Inc. is proud to offer the Models G1062 and G1063 Benchtop Grinders. These grinders contribute to Grizzly’s growing family of fine metalworking machinery. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation and experience proof of Grizzly’s commitment to customer satisfaction. The Models G1062 and G1063 are designed for use in a home or small professional shop.
The information in this manual has been obtained from sources we believe to be reliable and as upto-date as possible. We have included some important safety measures which we believe to be essential to this machine’s operation. While most safety measures are generally universal, Grizzly reminds you that each workshop is different and safety rules should be considered as they apply to your specific situation.
7. KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance away from your work area. 8. MAKE WORKSHOP CHILD-PROOF with padlocks, master switches, or by removing starter keys. 9. DO NOT FORCE TOOL. Tools work better and more safely when they are allowed to work at their own speed. 10. USE THE RIGHT TOOL. Do not use a tool or an attachment to do a job for which it was not intended. 11. WEAR PROPER APPAREL.
23. DRUGS, ALCOHOL, MEDICATION. Do not operate the tool under the influence of drugs, alcohol, or any medication. Never operate machinery when overly fatigued. 24. DO NOT WORK IN HASTE or operate machine if you are mentally or physically fatigued. 25. IF THERE IS SOMETHING YOU DO NOT KNOW OR UNDERSTAND, DO NOT OPERATE MACHINE! Ask for help first. Confusion can be dangerous. 26. BAD HABITS ARE DANGEROUS. Review all safety procedures often. IV.
Figure 2 Figure 1 3. Tighten the fasteners until the tool rest is secure. Figure 1. 4. Attach the eyeshield assembly to the threaded hole in the upper inside portion of the wheel housing with one of the two smaller hex bolts or knobs provided. 5. Attach the eyeshields with the small screws, nuts, and washers provided. Adjust the eyeshield to suit your needs by loosening the hex bolt or knob and moving to the desired position. Retighten fastener. Figure 2. Repeat steps 1-5 for the opposite side.
B. GROUNDING This equipment must be grounded. This grinder is equipped with a power cord and plug with a ground wire. Please ensure that the outlet and circuit you select is wired for 110/120V and is properly grounded. If it is not, it will be necessary to run a separate 12 AWG copper wire from the outlet to a known ground. If adding a new circuit, please ensure that the circuit is connected to the grounding terminal in your electric service panel.
2. NEVER STICK AN OBJECT AGAINST A WHEEL TO STOP THE GRINDER. Let it slow on its own. 3. ALWAYS USE THE TOOL REST AND SAFETY GUARDS. Supports and guards are essential for safe grinder operation. 4. USE ONLY PROPERLY SIZED WHEELS. The wrong sized wheel can dangerously increase or decrease operating speed at the grinding surface. A wheel that is too large could come in contact with the wheel housing, potentially damaging the machine. 5. ALWAYS WEAR EYE PROTECTION.
2. Turn the shaft nut counterclockwise on the right, or clockwise on the left, while holding the wheel. 3 Remove the nut, washer, and the wheel. 4. To install a new wheel, reverse the above procedures. XI. CLOSURE The following pages contain machine specifications, warranty and return information, a parts diagram, and a parts list. Please write or call the appropriate regional service department if you need service assistance. Our service staff will be glad to help you.
XIII. WARRANTY AND RETURNS LIMITED WARRANTY Grizzly Imports, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
XIV. PARTS DIAGRAM 32 30 11 33 12 27 9 27 28 14 26 8 4 45 42 45 2 16 35 36 42 37 5 7 10 3 1 7 47 27 36 14 13 41 14 19 20 48 34 18 31 28 21 23 27 25 11 22 24 43 14 33 29 XV.