Instructions / Assembly

ManualsBrandsGronomics ManualsGarden Center24 in. x 33 in. x 33 in. Vinyl Wrapped Elevated Garden Bed with Shelf Wood Planter

www.gronomics.com East Bethel, MN USA

763-753-7374

Vinyl Wrapped Elevated Garden Bed

(24” x 33”) Assembly Instruction

Continued

Parts List

ITEM QTY. PART # DESCRIPTION

1 4 VW3000E

Corner Post, 2-3/4" x 2-3/4" x 30"

2 1 VW3100L

Side Rail w/Logo, 31" x 4-1/4" x 1"

3 3 VW3100

Side Rail, 31” x 4-1/4" x 1"

4 2 VW3102

Side Rail w/Cleat, 31" x 4-1/4" x 1"

5 6 VW2100

Side Rail, 21” x 4-1/4" x 1"

6 5

Bottom Board, 20-3/4" x 5-1/2 x 1"

7 1 FL2236 Fabric Liner 22” x 36”

8 4 VWCAST Caster

R49-114ZY, CS8-114ZY Hardware Bag, (Qty: (48) R49-114ZY & Qty: (12) CS8 - 114ZY)

VW3030

Caps

Wooden Block 90°

Stack matching pieces in piles. Using the parts list, locate

and count the individual pieces and verify that you have

received the correct number of pieces.

If any pieces are missing or replacement parts are required,

contact Gronomics at 1-855-299-6727.

NOTE: It is recommended to place a protective layer

between the ground and the pieces during assembly. This

will help prevent damage to the pieces.

Parts Identification Box 1

Item #: VWEGB 24-33

Packaged & Inspected by: Date:

2034BB

Summary of content (5 pages)

PAGE 1
Vinyl Wrapped Elevated Garden Bed (24” x 33”) Assembly Instruction 1 Parts Identification Box 1 Item #: VWEGB 24-33 Stack matching pieces in piles. Using the parts list, locate and count the individual pieces and verify that you have received the correct number of pieces. 6 5 1 7 4 3 2 If any pieces are missing or replacement parts are required, contact Gronomics at 1-855-299-6727. NOTE: It is recommended to place a protective layer between the ground and the pieces during assembly.
PAGE 2
Parts Identification Box 2 (Optional) If any pieces are missing or replacement parts are required, contact Gronomics at 1-855-299-6727. 12 NOTE: It is recommended to place a protective layer between the ground and the pieces during assembly. This will help prevent damage to the pieces. Parts List Box 2 (Optional) ITEM 12 3 QTY. 1 PART # VWSH31 DESCRIPTION Shelf 22” x 31” Side Rail Assembly Locate the four 30” corner posts (Item 1).
PAGE 3
5 Side Rail Assembly Continued Install a 31” side rail (Item 3) and slide upward until the tongue and groove is fully seated with the upper side rail. Install two screws (Item 9) into each end of the side rail. 3 4 Install a 31”side rail (w/cleat) (Item 4) and slide upward until the tongue and groove is fully seated. Install two screws (Item 9) into each end of the side rail (w/cleat). Repeat steps 4 and 5 for the opposite side rail assembly.
PAGE 4
8 Bottom Boards and Fabric Assembly Tip the box assembly upright and install the bottom boards (Item 6), space evenly. 7 6 Install liner (Item 7) into bottom of box. 9 Cap Installation Install caps (Item 10) on each corner post. 10 Continued www.gronomics.
PAGE 5
10 Bottom Shelf Installation (Optional) Install the shelf (Item 12) (if applicable) inside the corner posts and rest the shelf on the caster wheel brackets. 12 11 Bottom Shelf Installation (Optional) Continued Place the garden bed on it’s side and install a screw if you choose to through each caster wheel bracket into shelf. (Screws are not provided) www.gronomics.