Quick Reference Guide
Table Of Contents
- Contents
- Section 1: Introduction to Palm functions
- 1. PC system requirements
- 2. Understanding G18 interface and controls
- 3. Tapping versus clicking
- 4. Starting G18 and calibrating its screen
- 5. Adjusting screen brightness and contrast
- 6. To launch applications
- 7. Introduction to G18 interface
- 8. Setting up the G18 interface
- 9. Setting date, time and time zone
- 10.Setting Sleep Mode
- 11.Setting alert sound and volume
- 12.Setting system interface language
- 13.Setting up phone to phone IRDA data transfer
- 14.GPRS/communication setting
- 15.Using the onscreen keyboard
- 16.Installing add-on applications
- 17.Removing applications
- 18.HotSync Setting
- 19.IR HotSync operations
- 20.Flash BackupMan
- 21.Data transfer from other Palm terminals
- Section 2 : Communication and PDA Features
- Appendix I:Safety
- Appendix II: Install CD
- Appendix III: Specification
- Appendix IV: Care and maintenance
- Appendix V: Reset your G18
- Appendix VI: FCC Information
Section 1: Introduction to Palm functions
18.HotSync Setting
G18 Quick Reference Manual 25
• Serial Port. indicates which serial port is connected to the G18 by
HotSync Manager. The Palm Desktop installation software will
detect the serial port automatically.
• Speed. Indicates the transmitting speed between the G18 and the
software of Palm Desktop. Try the "As Fast As Possible rate" first,
and adjust downward if you experience problems. This setting
allows Palm Desktop and your G18 to find and use the fastest
speed.
5.Tap "Modem" tab to display the modem settings, the settings are user
definable.
6.For network connection settings, tap "Network" tab to display the
settings.
7.Tap "OK" after completion of settings.
8.Connect the PC to your G18 with the HotSync cable.
9.Select "HotSync" from "system".
10.Select "Local" or "Cradle/Cable".