Quick Reference Guide
Table Of Contents
- Contents
- Section 1: Introduction to Palm functions
- 1. PC system requirements
- 2. Understanding G18 interface and controls
- 3. Tapping versus clicking
- 4. Starting G18 and calibrating its screen
- 5. Adjusting screen brightness and contrast
- 6. To launch applications
- 7. Introduction to G18 interface
- 8. Setting up the G18 interface
- 9. Setting date, time and time zone
- 10.Setting Sleep Mode
- 11.Setting alert sound and volume
- 12.Setting system interface language
- 13.Setting up phone to phone IRDA data transfer
- 14.GPRS/communication setting
- 15.Using the onscreen keyboard
- 16.Installing add-on applications
- 17.Removing applications
- 18.HotSync Setting
- 19.IR HotSync operations
- 20.Flash BackupMan
- 21.Data transfer from other Palm terminals
- Section 2 : Communication and PDA Features
- Appendix I:Safety
- Appendix II: Install CD
- Appendix III: Specification
- Appendix IV: Care and maintenance
- Appendix V: Reset your G18
- Appendix VI: FCC Information
Section 2 : Communication and PDA Features
5. Using the Camera
G18 Quick Reference Manual 67
Description of buttons:
: Setting Icon.
: Select different types of photo frame.
: Select the pixer size of picture (including 160*160, 160*200,
320*240)£¨when you change to 320*240,a Zoom in and Zoom out buttons
will be added to the interface( / ).
Five modes of White-balance:
sunny ,cloudy ,daylight lamp ,bulb ,auto
Zooming:
Tap( / ) to zoom in or zoom out the photo.
focusing:
: Zoom in , Zoom out
Three modes of taking photos:
: Normal mode (press button after setting)
: Delay mode (press button after setting)
: Continuous mode (press button after setting)
Browsing photos
Browsing the photos by pressing the Left/Right key on the front panel of
your G18.
NOTE: The photos taken are saved in the PhotoAlbum. Refer to
Chapter 7 - Using the Photo Album in this section for more
information.