Quick Reference Guide
Table Of Contents
- Contents
- Section 1: Introduction to Palm functions
- 1. PC system requirements
- 2. Understanding G18 interface and controls
- 3. Tapping versus clicking
- 4. Starting G18 and calibrating its screen
- 5. Adjusting screen brightness and contrast
- 6. To launch applications
- 7. Introduction to G18 interface
- 8. Setting up the G18 interface
- 9. Setting date, time and time zone
- 10.Setting Sleep Mode
- 11.Setting alert sound and volume
- 12.Setting system interface language
- 13.Setting up phone to phone IRDA data transfer
- 14.GPRS/communication setting
- 15.Using the onscreen keyboard
- 16.Installing add-on applications
- 17.Removing applications
- 18.HotSync Setting
- 19.IR HotSync operations
- 20.Flash BackupMan
- 21.Data transfer from other Palm terminals
- Section 2 : Communication and PDA Features
- Appendix I:Safety
- Appendix II: Install CD
- Appendix III: Specification
- Appendix IV: Care and maintenance
- Appendix V: Reset your G18
- Appendix VI: FCC Information
Section 1: Introduction to Palm functions
2. Understanding G18 interface and controls
G18 Quick Reference Manual 3
Power Button. Pressing the power button turns the G18 on (if it is off) and
returns to the last screen that was displayed. Press the power button to turn
the G18 off.Use the backlight to illuminate the screen in low-light
conditions.
Text Input Area. Write letters and numbers in this area using the
Graffiti
®
2 alphabet.
Up/Down Key. Displays text and other information that extends beyond
the area of the G18 screen. Press the lower half of the scroll button to scroll
down and view information below the viewing area. Press the upper half to
view information above the viewing area.
Reset
Switch
Stylus
Earphone
Jack
I/O Port
Sleep/Power
Button