Quick Reference Guide
Table Of Contents
- Contents
- Section 1: Introduction to Palm functions
- 1. PC system requirements
- 2. Understanding G18 interface and controls
- 3. Tapping versus clicking
- 4. Starting G18 and calibrating its screen
- 5. Adjusting screen brightness and contrast
- 6. To launch applications
- 7. Introduction to G18 interface
- 8. Setting up the G18 interface
- 9. Setting date, time and time zone
- 10.Setting Sleep Mode
- 11.Setting alert sound and volume
- 12.Setting system interface language
- 13.Setting up phone to phone IRDA data transfer
- 14.GPRS/communication setting
- 15.Using the onscreen keyboard
- 16.Installing add-on applications
- 17.Removing applications
- 18.HotSync Setting
- 19.IR HotSync operations
- 20.Flash BackupMan
- 21.Data transfer from other Palm terminals
- Section 2 : Communication and PDA Features
- Appendix I:Safety
- Appendix II: Install CD
- Appendix III: Specification
- Appendix IV: Care and maintenance
- Appendix V: Reset your G18
- Appendix VI: FCC Information
Section 2 : Communication and PDA Features
9.Using the Date Book
G18 Quick Reference Manual 77
• If the event is longer or shorter than an hour, tap directly on the
time to open the Set Time dialog box.You can change time of the
event here.
• Set the duration of the event in either of the following ways:
– Tap the time columns in the Set Time dialog box to set the Start
Time; Tap End Time; then tap the time columns to set the End
Time.
– Tap All Day if the event lasts all day. The default hours of a
standard business day are set by the user, and may be changed
using the Preferences command in the Date Book application.
See the section “Changing the displayed Start and End
Times” later in this chapter.
• Tap OK.
• Tap the blank region,a vertical line will be shown besides the time
to show the duration of the event.
Tap to Select the
time
the begin-
ning time
Input the event
Tap the time to
display the Set
Time dialog
box.