Quick Reference Guide
Table Of Contents
- Contents
- Section 1: Introduction to Palm functions
- 1. PC system requirements
- 2. Understanding G18 interface and controls
- 3. Tapping versus clicking
- 4. Starting G18 and calibrating its screen
- 5. Adjusting screen brightness and contrast
- 6. To launch applications
- 7. Introduction to G18 interface
- 8. Setting up the G18 interface
- 9. Setting date, time and time zone
- 10.Setting Sleep Mode
- 11.Setting alert sound and volume
- 12.Setting system interface language
- 13.Setting up phone to phone IRDA data transfer
- 14.GPRS/communication setting
- 15.Using the onscreen keyboard
- 16.Installing add-on applications
- 17.Removing applications
- 18.HotSync Setting
- 19.IR HotSync operations
- 20.Flash BackupMan
- 21.Data transfer from other Palm terminals
- Section 2 : Communication and PDA Features
- Appendix I:Safety
- Appendix II: Install CD
- Appendix III: Specification
- Appendix IV: Care and maintenance
- Appendix V: Reset your G18
- Appendix VI: FCC Information
Section 2 : Communication and PDA Features
9.Using the Date Book
G18 Quick Reference Manual 79
• Select the 5 next to poplist and enter any number from 0 to 99
(inclusive) as the number of time units.
• Tap the field at the right of “Alarm Sound” to select a melody.
• Tap OK.
• When the alarm sounds, follow one of the steps as below:
Tap “OK”, to stop the alarm and return.
NOTE: You can also set the option in the tab of “SMS”to alert
you by sending message to you.
Tap here to
select unit of time.
Enter number
of time units
here.
Tap None
Tap Here
to select
the type
of alarm
Tips
button instruction:
• OK - confirm the
seclection.
• Play - play the music
• Stop - stop playing music
• Delete - delete the music