Product Manual

ManualsBrandsGrundfos Pumps ManualsElectricGrundfos 5SQ07-270 - 5 GPM 3/4 HP SQ-Series Deep Well Submersible Pump (270' Rated Head) (2W - 200-240V)

101

102

103

104

105

106

107

108

109

110

Table Of Contents

1. SQ, SQE introduction
- SQ, SQE features and benefits
- SQ, SQE identification
  - Type key example SQ, SQE
2. SQ, SQE applications
- SQ with pressure switch and pressure tank
- Constant-pressure control with CU 301, residential water supply
- Constant-pressure control with CU 301, irrigation
- Maintaining a constant water table
- Emptying or filling a tank
- Pumping from one tank to another
- Setting of operating parameters
- SQE with manual speed control
3. Performance range
4. SQ, SQE installation
5. Sizing and selection
- System sizing guide
6. Cable sizing
- Cable sizing chart
7. SQ, SQE curve charts
- 5 SQ, SQE
- 10 SQ, SQE
- 15 SQ, SQE
- 22 SQ, SQE
- 30 SQ, SQE
8. SQ, SQE technical data
- Electrical data
  - Control units CU 300 and CU 301
- Operating conditions
  - Storage conditions
- Motor data
- Dimensions and weights
  - SQ, SQE
9. SQ, SQE construction
- Materials of construction
- SQ, SQE material specification
- Control units for SQ, SQE
- CU 301
- CU 300
10. CU331SP variable frequency drive
- Features
  - User interface
  - Functions
- Applications
- System components
- Identification
  - Nameplate
- CU331SP product range
- CU331SP performance range
- CU331SP sizing
- CU331SP operation
- CU331SP installation
  - Mechanical installation
- CU331SP electrical connection
- CU331SP technical data
- CU331SP curve charts
11. Accessories
- CU 301 Constant Pressure System
- CU 300 Status Box & R100
- SQ, SQE flow sleeves
12. SP introduction
- Introduction
- Applications
  - Pumped liquids
- Features and benefits
- Identification
13. SP product overview
- SP performance range 60 Hz
- Pump range
- Motor range
- Motor protection and controllers
14. SP construction
- Sectional drawing, SP pump 4" spline shaft
  - Material specification
- Sectional drawing, SP pump 4" smooth shaft
- Sectional drawing, SP pump 6" (SP 85S - 300S)
  - Material specification
- Sectional drawing, SP pump 8" (SP 385S - 475S)
  - Material specification
- Sectional drawing, SP pump 10" (SP 625S - 1100S)
  - Material specification
- Sectional drawing, MS motors
  - Material specification, MS 402, MS 4000, and MS 6000C motors
  - R-version motor
- Sectional drawing, MMS motors
15. SP operating conditions
- Operating conditions
  - Maximum liquid temperature
  - Operating pressure
- Curve conditions
  - General
16. How to read the curve charts
17. SP curve charts and technical data
- 4" and larger wells
- SP 5S (5 gpm)
- SP 7S (7 gpm)
- SP 10S (10 gpm)
- SP 16S (16 gpm)
- SP 25S (25 gpm)
- SP 35S (35 gpm)
- SP 45S (45 gpm)
- SP 62S (62 gpm)
- SP 77S (77 gpm)
- 6" and larger wells
- SP 85S (85 gpm)
- SP 150S (150 gpm)
- SP 230S (230 gpm)
- SP 300S (300 gpm)
- 8" and larger wells
- SP 385S (385 gpm)
- SP 475S (475 gpm)
- 10" and larger wells
- SP 625S (625 gpm)
- SP 800S (800 gpm)
- SP 1100S (1100 gpm)
18. SP electrical data
19. Accessories
- MP 204
  - Applications
  - Benefits
- Control functions
- CU331SP constant pressure drive kits
  - Grundfos GO remote app and Grundfos GO CAPS
- Connecting pieces
  - Thread-to- thread
- Zinc anodes
- SA-SPM 6 control boxes
- Pt100
20. Energy consumption
- Energy consumption of submersible pumps
21. Cables
- Cable sizing charts
22. Friction loss tables
23. Grundfos Product Center

SP curve charts and technical data

SQ, SQE, CU 331, and SP

103

6" and larger wells - continued

SP 85S (85 gpm) / 6, 8 inch motors

Notes:

Control box is required for 3-wire, single-phase applications. Data does not include control box.

DS designation = Built into sleeve, 1 - 1/2" NPT, 6" minimum well diameter.

Performance conforms to ISO 9906. 1999 (E) Annex A. Minimum submergence is 2 feet.

Pump model

Nom.

head

[ft]

Volts

[V]

Motor

[Hp]

Dimensions

Net weight

(complete)

[lb]

85S

ABCDE

TM01 2435 1798

[in. (mm)] [in. (mm)] [in. (mm)] [in. (mm)] [in. (mm)]

85S - Motor dia. 6 inch, 60 Hz, rated flow 85 gpm (3" NPT)

85S200-14 533

3 230 20 ▲ 74.10 (1882) 29.61 (752) 44.49 (1130) 5.52 (140) 5.52 (140) 143.1

3 460 20 ▲ 74.10 (1882) 29.61 (752) 44.49 (1130) 5.52 (140) 5.52 (140) 143.1

85S200-15 593

3 230 20 ▲ 76.50 (1943) 29.61 (752) 46.89 (1191) 5.52 (140) 5.52 (140) 147.6

3 460 20 ▲ 76.50 (1943) 29.61 (752) 46.89 (1191) 5.52 (140) 5.52 (140) 147.6

85S200-16 633

3 230 20 ▲ 78.86 (2003) 29.61 (752) 49.26 (1251) 5.52 (140) 5.52 (140) 157.5

3 460 20 ▲ 78.86 (2003) 29.61 (752) 49.26 (1251) 5.52 (140) 5.52 (140) 157.5

85S200-17 672

3 230 20 ▲ 81.26 (2064) 29.61 (752) 51.66 (1312) 5.52 (140) 5.52 (140) 160.2

3 460 20 ▲ 81.26 (2064) 29.61 (752) 51.66 (1312) 5.52 (140) 5.52 (140) 160.2

85S200-18 712

3 230 20 ▲ 83.63 (2124) 29.61 (752) 54.02 (1372) 5.52 (140) 5.52 (140) 161.1

3 460 20 ▲ 83.63 (2124) 29.61 (752) 54.02 (1372) 5.52 (140) 5.52 (140) 179.0

85S250-19 752

3 230 25 ▲ 88.19 (2240) 31.78 (807) 56.42 (1433) 5.52 (140) 5.52 (140) 191.7

3 460 25 ▲ 88.19 (2240) 31.78 (807) 56.42 (1433) 5.52 (140) 5.52 (140) 191.7

85S250-20 792

3 230 25 ▲ 90.56 (2300) 31.78 (807) 58.78 (1493) 5.52 (140) 5.52 (140) 195.3

3 460 25 ▲ 90.56 (2300) 31.78 (807) 58.78 (1493) 5.52 (140) 5.52 (140) 195.3

85S250-21 832

3 230 25 ▲ 92.96 (2361) 31.78 (807) 61.19 (1554) 5.52 (140) 5.52 (140) 198.0

3 460 25 ▲ 92.96 (2361) 31.78 (807) 61.19 (1554) 5.52 (140) 5.52 (140) 198.0

85S250-22 872

3 230 25 ▲ 95.32 (2421) 31.78 (807) 63.55 (1614) 5.52 (140) 5.52 (140) 199.8

3 460 25 ▲ 95.32 (2421) 31.78 (807) 63.55 (1614) 5.52 (140) 5.52 (140) 199.8

E = Maximum diameter

of pump including

cable guard and motor.

85S300-23 912

3 230 30 ▲ 100.08 (2542) 34.14 (867) 65.95 (1675) 5.52 (140) 5.52 (140) 199.8

3 460 30 ▲ 100.08 (2542) 34.14 (867) 65.95 (1675) 5.52 (140) 5.52 (140) 199.8

85S300-24 952

3 230 30 ▲ 102.45 (2602) 34.14 (867) 68.31 (1735) 5.52 (140) 5.52 (140) 216.0

3 460 30 ▲ 102.45 (2602) 34.14 (867) 68.31 (1735) 5.52 (140) 5.52 (140) 216.0

85S300-25 991

3 230 30 ▲ 104.85 (2663) 34.14 (867) 70.71 (1796) 5.52 (140) 5.52 (140) 219.6

3 460 30 ▲ 104.85 (2663) 34.14 (867) 70.71 (1796) 5.52 (140) 5.52 (140) 219.6

85S300-26 1031

3 230 30 ▲ 107.21 (2723) 34.14 (867) 73.08 (1856) 5.52 (140) 5.52 (140) 221.4

3 460 30 ▲ 107.21 (2723) 34.14 (867) 73.08 (1856) 5.52 (140) 5.52 (140) 221.4

85S400-27 1071 3 460 40 ▲ 109.61 (2784) 34.14 (867) 75.48 (1917) 5.52 (140) 5.52 (140) 234.9

85S400-28 1111 3 460 40 ▲

117.09 (2974) 39.26 (997) 77.84 (1977) 5.52 (140) 5.52 (140) 246.6

85S40

0-29 1151 3 460 40 ▲ 119.49 (3035) 39.26 (997) 80.24 (2038) 5.52 (140) 5.52 (140) 248.4

85S400-30 1191 3 460 40 ▲ 121.86 (3095) 39.26 (997) 82.60 (2098) 5.52 (140) 5.52 (140) 270.0

85S400-33DS 1310 3 460 40 ▲ 142.88 (3629) 39.26 (997) 103.63 (2632) 5.52 (140) 6.89 (175) 515.5

85S400-36DS 1430 3 460 40 ▲ 150.00 (3810) 39.26 (997) 110.75 (2813) 5.52 (140) 6.89 (175) 454.8

85S500-39DS 1510 3 460 50 ▲ 173.94 (4418) 56.03 (1423) 117.92 (2995) 5.63 (143) 6.89 (175) 469.0

85S - Motor dia. 8 inch, 60 Hz, rated flow 85 gpm (3" NPT)

85S400-33DS 1310 3 460 40 ? 145.12 (3686) 43.71 (1110) 101.42 (2576) 7.56 (192) 7.56 (192) 652.7

85S400-36DS 1310 3 460 40 ? 152.25 (3867) 43.71 (1110) 108.55 (2757) 7.56 (192) 7.56 (192) 592.0

85S400-39DS 1510 3 460 50 ? 159.41 (4049) 43.71 (1110) 115.71 (2939) 7.56 (192) 7.56 (192) 537.2

▲ MS 6000C motor.

? MMS 8000 motor.

Rp 2

B C

NPT