Product Manual

ManualsBrandsGrundfos Pumps ManualsElectricGrundfos 5SQ07-270 - 5 GPM 3/4 HP SQ-Series Deep Well Submersible Pump (270' Rated Head) (2W - 200-240V)

101

102

103

104

105

106

107

108

109

110

Table Of Contents

1. SQ, SQE introduction
- SQ, SQE features and benefits
- SQ, SQE identification
  - Type key example SQ, SQE
2. SQ, SQE applications
- SQ with pressure switch and pressure tank
- Constant-pressure control with CU 301, residential water supply
- Constant-pressure control with CU 301, irrigation
- Maintaining a constant water table
- Emptying or filling a tank
- Pumping from one tank to another
- Setting of operating parameters
- SQE with manual speed control
3. Performance range
4. SQ, SQE installation
5. Sizing and selection
- System sizing guide
6. Cable sizing
- Cable sizing chart
7. SQ, SQE curve charts
- 5 SQ, SQE
- 10 SQ, SQE
- 15 SQ, SQE
- 22 SQ, SQE
- 30 SQ, SQE
8. SQ, SQE technical data
- Electrical data
  - Control units CU 300 and CU 301
- Operating conditions
  - Storage conditions
- Motor data
- Dimensions and weights
  - SQ, SQE
9. SQ, SQE construction
- Materials of construction
- SQ, SQE material specification
- Control units for SQ, SQE
- CU 301
- CU 300
10. CU331SP variable frequency drive
- Features
  - User interface
  - Functions
- Applications
- System components
- Identification
  - Nameplate
- CU331SP product range
- CU331SP performance range
- CU331SP sizing
- CU331SP operation
- CU331SP installation
  - Mechanical installation
- CU331SP electrical connection
- CU331SP technical data
- CU331SP curve charts
11. Accessories
- CU 301 Constant Pressure System
- CU 300 Status Box & R100
- SQ, SQE flow sleeves
12. SP introduction
- Introduction
- Applications
  - Pumped liquids
- Features and benefits
- Identification
13. SP product overview
- SP performance range 60 Hz
- Pump range
- Motor range
- Motor protection and controllers
14. SP construction
- Sectional drawing, SP pump 4" spline shaft
  - Material specification
- Sectional drawing, SP pump 4" smooth shaft
- Sectional drawing, SP pump 6" (SP 85S - 300S)
  - Material specification
- Sectional drawing, SP pump 8" (SP 385S - 475S)
  - Material specification
- Sectional drawing, SP pump 10" (SP 625S - 1100S)
  - Material specification
- Sectional drawing, MS motors
  - Material specification, MS 402, MS 4000, and MS 6000C motors
  - R-version motor
- Sectional drawing, MMS motors
15. SP operating conditions
- Operating conditions
  - Maximum liquid temperature
  - Operating pressure
- Curve conditions
  - General
16. How to read the curve charts
17. SP curve charts and technical data
- 4" and larger wells
- SP 5S (5 gpm)
- SP 7S (7 gpm)
- SP 10S (10 gpm)
- SP 16S (16 gpm)
- SP 25S (25 gpm)
- SP 35S (35 gpm)
- SP 45S (45 gpm)
- SP 62S (62 gpm)
- SP 77S (77 gpm)
- 6" and larger wells
- SP 85S (85 gpm)
- SP 150S (150 gpm)
- SP 230S (230 gpm)
- SP 300S (300 gpm)
- 8" and larger wells
- SP 385S (385 gpm)
- SP 475S (475 gpm)
- 10" and larger wells
- SP 625S (625 gpm)
- SP 800S (800 gpm)
- SP 1100S (1100 gpm)
18. SP electrical data
19. Accessories
- MP 204
  - Applications
  - Benefits
- Control functions
- CU331SP constant pressure drive kits
  - Grundfos GO remote app and Grundfos GO CAPS
- Connecting pieces
  - Thread-to- thread
- Zinc anodes
- SA-SPM 6 control boxes
- Pt100
20. Energy consumption
- Energy consumption of submersible pumps
21. Cables
- Cable sizing charts
22. Friction loss tables
23. Grundfos Product Center

SP curve charts and technical data

SQ, SQE, CU 331, and SP

107

6" and larger wells - continued

SP 150S (150 gpm) / 6, 8 inch motor

Notes:

Control box is required for 3-wire, single-phase applications. Data does not include control box.

DS designation = Built into sleeve, 1 - 1/2" NPT, 6" minimum well diameter.

Performance conforms to ISO 9906. 1999 (E) Annex A. Minimum submergence is 2 feet.

Pump model

Nom.

head

[ft]

Volts

[V]

Motor

[Hp]

Dimensions

Net weight

(complete)

[lb]

ABCDE 150S

TM00 0960 1196

[in. (mm)] [in. (mm)] [in. (mm)] [in. (mm)] [in. (mm)]

150S - Motor dia. 6 inch, 60 Hz, rated flow 150 gpm (3" NPT)

150S300-15 562

3 230 30 ▲ 101.89 (2588) 34.14 (867) 67.76 (1721) 5.52 (140) 5.52 (140) 209.7

3 460 30 ▲ 101.89 (2588) 34.14 (867) 67.76 (1721) 5.52 (140) 5.52 (140) 209.7

150S300-16 600

3 230 30 ▲ 105.67 (2684) 34.14 (867) 71.54 (1817) 5.52 (140) 5.52 (140) 211.5

3 460 30 ▲ 105.67 (2684) 34.14 (867) 71.54 (1817) 5.52 (140) 5.52 (140) 211.5

150S300-17 637

3 230 30 ▲ 109.45 (2780) 34.14 (867) 75.32 (1913) 5.52 (140) 5.52 (140) 216.0

3 460 30 ▲ 109.45 (2780) 34.14 (867) 75.32 (1913) 5.52 (140) 5.52 (140) 246.6

150S400-18 675 3 460 40 ▲ 118.35 (3006) 39.26 (997) 79.10 (2009) 5.52 (140) 5.52 (140) 246.6

150S400-19 713 3 460 40 ▲ 122.13 (3102) 39.26 (997) 82.88 (2105) 5.52 (140) 5.52 (140) 248.4

150S400-20 751 3 460 40 ▲ 125.91 (3198) 39.26 (997) 86.66 (2201) 5.52 (140) 5.52 (140) 291.0

150S400-21 789 3 460 40 ▲ 129.69 (3294) 39.26 (997) 90.44 (2297) 5.52 (140) 5.52 (140) 271.8

150S400-22 826 3 460 40 ▲ 133.47 (3390) 39.26 (997) 94.22 (2393) 5.52 (140) 5.52 (140) 305.9

150S400-23 864 3 460 40 ▲ 137.25 (3486) 39.26 (997) 98.00 (2489) 5.52 (140) 5.52 (140) 277.2

150S500-24 902 3 460 50 ☼ 157.88 (4010) 56.11 (1425) 101.78 (2585) 5.67 (144) 5.67 (144) 411.8

150S500-25 940 3 460 50 ☼ 161.66 (4106) 56.11 (1425) 105.56 (2681) 5.67 (144) 5.67 (144) 419.0

150S500-26 977 3 460 50 ☼ 165.44 (4202) 56.11 (1425) 109.34 (2777) 5.67 (144) 5.67 (144) 426.2

150S500-27 1015 3 460 50 ☼ 169.22 (4298) 56.11 (1425) 113.12 (2873) 5.67 (144) 5.67 (144) 433.4

150S500-28 1053 3 460 50 ☼ 173.00 (4394) 56.11 (1425) 116.89 (2969) 5.67 (144) 5.67 (144) 440.6

150S600-29DS 1091 3 460 60 - - - 134.53 (3417) - 6.89 (175) -

E = Maximum diameter

of pump including

cable guard and motor.

150S600-31DS 1166 3 460 60 - - - 142.09 (3609) - 6.89 (175) -

150S600-33DS 1242 3 460 60

- - - 149.65 (3801) - 6.89 (175) -

150S - Motor dia. 8 inch, 60 Hz, rated flow 150 gpm (3" NPT)

150S500-24 902 3 460 50 * 162.45 (4126) 45.67 (1160) 116.78 (2966) 7.56 (192) 7.56 (192) 484.5

150S500-25 940 3 460 50 * 166.23 (4222) 45.67 (1160) 120.56 (3062) 7.56 (192) 7.56 (192) 491.7

150S500-26 977 3 460 50 * 170.00 (4318) 45.67 (1160) 124.34 (3158) 7.56 (192) 7.56 (192) 498.9

150S500-27 1015 3 460 50 * 173.78 (4414) 45.67 (1160) 128.12 (3254) 7.56 (192) 7.56 (192) 506.1

150S500-28 1053 3 460 50 * 177.56 (4510) 45.67 (1160) 131.89 (3350) 7.56 (192) 7.56 (192) 513.3

150S600-29DS 1091 3 460 60 * 182.33 (4631) 50.00 (1270) 132.33 (3361) 7.56 (192) 7.56 (192) 612.7

150S600-31DS 1166 3 460 60 * 189.89 (4823) 50.00 (1270) 139.89 (3553) 7.56 (192) 7.56 (192) 623.7

150S600-33DS 1242 3 460 60 * 197.45 (5015) 50.00 (1270) 147.45 (3745) 7.56 (192) 7.56 (192) 639.1

150S750-36DS 1355 3 460 75 * 211.93 (5383) 53.15 (1350) 158.78 (4033) 7.56 (192) 7.56 (192) 689.2

150S750-39DS 1469 3 460 75 * 223.27 (5671) 53.15 (1350) 170.12 (4321) 7.56 (192) 7.56 (192) 704.6

▲ MS 6000C motor.

☼ Takes MMS 6 motor; not available as complete.

* Takes MMS 8000 motor; not available as complete.

B C

Rp 3

NPT