Product Manual

ManualsBrandsGrundfos Pumps ManualsElectricGrundfos 5SQ07-270 - 5 GPM 3/4 HP SQ-Series Deep Well Submersible Pump (270' Rated Head) (2W - 200-240V)

111

112

113

114

115

116

117

118

119

120

Table Of Contents

1. SQ, SQE introduction
- SQ, SQE features and benefits
- SQ, SQE identification
  - Type key example SQ, SQE
2. SQ, SQE applications
- SQ with pressure switch and pressure tank
- Constant-pressure control with CU 301, residential water supply
- Constant-pressure control with CU 301, irrigation
- Maintaining a constant water table
- Emptying or filling a tank
- Pumping from one tank to another
- Setting of operating parameters
- SQE with manual speed control
3. Performance range
4. SQ, SQE installation
5. Sizing and selection
- System sizing guide
6. Cable sizing
- Cable sizing chart
7. SQ, SQE curve charts
- 5 SQ, SQE
- 10 SQ, SQE
- 15 SQ, SQE
- 22 SQ, SQE
- 30 SQ, SQE
8. SQ, SQE technical data
- Electrical data
  - Control units CU 300 and CU 301
- Operating conditions
  - Storage conditions
- Motor data
- Dimensions and weights
  - SQ, SQE
9. SQ, SQE construction
- Materials of construction
- SQ, SQE material specification
- Control units for SQ, SQE
- CU 301
- CU 300
10. CU331SP variable frequency drive
- Features
  - User interface
  - Functions
- Applications
- System components
- Identification
  - Nameplate
- CU331SP product range
- CU331SP performance range
- CU331SP sizing
- CU331SP operation
- CU331SP installation
  - Mechanical installation
- CU331SP electrical connection
- CU331SP technical data
- CU331SP curve charts
11. Accessories
- CU 301 Constant Pressure System
- CU 300 Status Box & R100
- SQ, SQE flow sleeves
12. SP introduction
- Introduction
- Applications
  - Pumped liquids
- Features and benefits
- Identification
13. SP product overview
- SP performance range 60 Hz
- Pump range
- Motor range
- Motor protection and controllers
14. SP construction
- Sectional drawing, SP pump 4" spline shaft
  - Material specification
- Sectional drawing, SP pump 4" smooth shaft
- Sectional drawing, SP pump 6" (SP 85S - 300S)
  - Material specification
- Sectional drawing, SP pump 8" (SP 385S - 475S)
  - Material specification
- Sectional drawing, SP pump 10" (SP 625S - 1100S)
  - Material specification
- Sectional drawing, MS motors
  - Material specification, MS 402, MS 4000, and MS 6000C motors
  - R-version motor
- Sectional drawing, MMS motors
15. SP operating conditions
- Operating conditions
  - Maximum liquid temperature
  - Operating pressure
- Curve conditions
  - General
16. How to read the curve charts
17. SP curve charts and technical data
- 4" and larger wells
- SP 5S (5 gpm)
- SP 7S (7 gpm)
- SP 10S (10 gpm)
- SP 16S (16 gpm)
- SP 25S (25 gpm)
- SP 35S (35 gpm)
- SP 45S (45 gpm)
- SP 62S (62 gpm)
- SP 77S (77 gpm)
- 6" and larger wells
- SP 85S (85 gpm)
- SP 150S (150 gpm)
- SP 230S (230 gpm)
- SP 300S (300 gpm)
- 8" and larger wells
- SP 385S (385 gpm)
- SP 475S (475 gpm)
- 10" and larger wells
- SP 625S (625 gpm)
- SP 800S (800 gpm)
- SP 1100S (1100 gpm)
18. SP electrical data
19. Accessories
- MP 204
  - Applications
  - Benefits
- Control functions
- CU331SP constant pressure drive kits
  - Grundfos GO remote app and Grundfos GO CAPS
- Connecting pieces
  - Thread-to- thread
- Zinc anodes
- SA-SPM 6 control boxes
- Pt100
20. Energy consumption
- Energy consumption of submersible pumps
21. Cables
- Cable sizing charts
22. Friction loss tables
23. Grundfos Product Center

SP curve charts and technical data

SQ, SQE, CU 331, and SP

115

6" and larger wells - continued

SP 300S (300 gpm) / 6, 8 inch motor

Notes:

Control box is required for 3-wire, single-phase applications. Data does not include control box.

Performance conforms to ISO 9906 Annex A @ 8 ft. minimum submergence.

Pump model

Nom.

head

[ft]

Volts

[V]

Motor

[Hp]

Dimensions

Net weight

(complete)

[lb]

ABCDE 300S

TM00 0961 1196

[in. (mm)] [in. (mm)] [in. (mm)] [in. (mm)] [in. (mm)]

300S - Motor dia. 6 inch, 60 Hz, rated flow 300 gpm (4" NPT)

300S250-7AA 249

3 230 25 ▲ 73.98 (1879) 31.78 (807) 42.21 (1072) 5.52 (140) 5.79 (147) 217.8

3 460 25 ▲ 73.98 (1879) 31.78 (807) 42.21 (1072) 5.52 (140) 5.79 (147) 217.8

300S300-7 267

3 230 30 ▲ 76.34 (1939) 34.14 (867) 42.21 (1072) 5.52 (140) 5.79 (147) 217.8

3 460 30 ▲ 76.34 (1939) 34.14 (867) 42.21 (1072) 5.52 (140) 5.79 (147) 217.8

300S300-8 307

3 230 30 ▲ 80.79 (2052) 34.14 (867) 46.66 (1185) 5.52 (140) 5.79 (147) 224.1

3 460 30 ▲ 80.79 (2052) 34.14 (867) 46.66 (1185) 5.52 (140) 5.79 (147) 224.1

300S300-9B 329

3 230 30 ▲ 85.24 (2165) 34.14 (867) 51.11 (1298) 5.52 (140) 5.79 (147) 261.0

3 460 30 ▲ 85.24 (2165) 34.14 (867) 51.11 (1298) 5.52 (140) 5.79 (147) 261.0

300S400-9 346 3 460 40 ▲ 90.36 (2295) 39.26 (997) 51.11 (1298) 5.52 (140) 5.79 (147) 296.0

300S400-10 385 3 460 40 ▲ 94.81 (2408) 39.26 (997) 55.56 (1411) 5.52 (140) 5.79 (147) 300.5

300S400-11 425 3 460 40 ☼ 99.26 (2521) 39.26 (997) 60.00 (1524) 5.52 (140) 5.79 (147) 352.0

300S500-12 464 3 460 50 ☼ 120.56 (3062) 56.11 (1425) 64.45 (1637) 5.67 (144) 5.79 (147) 348.8

300S500-13 504 3 460 50 ☼ 125.00 (3175) 56.11 (1425) 68.90 (1750) 5.67 (144) 5.79 (147) 355.1

300S600-14 543 3 460 60 * - - 73.35 (1863) - 5.79 (147) -

300S600-15 582 3 460 60 * - - 77.80 (1976) - 5.79 (147) -

SP 300S - Motor dia. 8 inch, 60 Hz, rated flow 230 gpm (4" NPT)

300S600-14 543 3 460 60 * 125.12 (3178) 50.00 (1270) 75.12 (1908) 7.56 (192) 7.56 (192) 479.4

E = Maximum diameter

of pump including

cable guard and motor.

300S600-15 582 3 460 60 * 129.57 (3291) 50.00 (1270) 79.57 (2021) 7.56 (192) 7.56 (192) 519.4

300S750-16 622 3 460 75 * 137.17 (3484) 53.15 (1350) 84.02 (2134) 7.56 (192) 7.56 (192) 569.1

300S750-17 661 3 460 75 * 141.62 (3597) 53.15 (1350) 88.47 (2247) 7.56 (192) 7.56 (192) 575.4

300S750-18 701 3 460 75 * 146.07 (3710) 53.15 (1350) 92.92 (2360) 7.56 (192) 7.56 (192) 581.7

▲ MS 6000C motor.

☼ Takes MMS 6 motor; not available as complete.

* Takes MMS 8000 motor; not available as complete.

B C

NPT