Product Manual

ManualsBrandsGrundfos Pumps ManualsElectricGrundfos 5SQ07-270 - 5 GPM 3/4 HP SQ-Series Deep Well Submersible Pump (270' Rated Head) (2W - 200-240V)

121

122

123

124

125

126

127

128

129

130

Table Of Contents

1. SQ, SQE introduction
- SQ, SQE features and benefits
- SQ, SQE identification
  - Type key example SQ, SQE
2. SQ, SQE applications
- SQ with pressure switch and pressure tank
- Constant-pressure control with CU 301, residential water supply
- Constant-pressure control with CU 301, irrigation
- Maintaining a constant water table
- Emptying or filling a tank
- Pumping from one tank to another
- Setting of operating parameters
- SQE with manual speed control
3. Performance range
4. SQ, SQE installation
5. Sizing and selection
- System sizing guide
6. Cable sizing
- Cable sizing chart
7. SQ, SQE curve charts
- 5 SQ, SQE
- 10 SQ, SQE
- 15 SQ, SQE
- 22 SQ, SQE
- 30 SQ, SQE
8. SQ, SQE technical data
- Electrical data
  - Control units CU 300 and CU 301
- Operating conditions
  - Storage conditions
- Motor data
- Dimensions and weights
  - SQ, SQE
9. SQ, SQE construction
- Materials of construction
- SQ, SQE material specification
- Control units for SQ, SQE
- CU 301
- CU 300
10. CU331SP variable frequency drive
- Features
  - User interface
  - Functions
- Applications
- System components
- Identification
  - Nameplate
- CU331SP product range
- CU331SP performance range
- CU331SP sizing
- CU331SP operation
- CU331SP installation
  - Mechanical installation
- CU331SP electrical connection
- CU331SP technical data
- CU331SP curve charts
11. Accessories
- CU 301 Constant Pressure System
- CU 300 Status Box & R100
- SQ, SQE flow sleeves
12. SP introduction
- Introduction
- Applications
  - Pumped liquids
- Features and benefits
- Identification
13. SP product overview
- SP performance range 60 Hz
- Pump range
- Motor range
- Motor protection and controllers
14. SP construction
- Sectional drawing, SP pump 4" spline shaft
  - Material specification
- Sectional drawing, SP pump 4" smooth shaft
- Sectional drawing, SP pump 6" (SP 85S - 300S)
  - Material specification
- Sectional drawing, SP pump 8" (SP 385S - 475S)
  - Material specification
- Sectional drawing, SP pump 10" (SP 625S - 1100S)
  - Material specification
- Sectional drawing, MS motors
  - Material specification, MS 402, MS 4000, and MS 6000C motors
  - R-version motor
- Sectional drawing, MMS motors
15. SP operating conditions
- Operating conditions
  - Maximum liquid temperature
  - Operating pressure
- Curve conditions
  - General
16. How to read the curve charts
17. SP curve charts and technical data
- 4" and larger wells
- SP 5S (5 gpm)
- SP 7S (7 gpm)
- SP 10S (10 gpm)
- SP 16S (16 gpm)
- SP 25S (25 gpm)
- SP 35S (35 gpm)
- SP 45S (45 gpm)
- SP 62S (62 gpm)
- SP 77S (77 gpm)
- 6" and larger wells
- SP 85S (85 gpm)
- SP 150S (150 gpm)
- SP 230S (230 gpm)
- SP 300S (300 gpm)
- 8" and larger wells
- SP 385S (385 gpm)
- SP 475S (475 gpm)
- 10" and larger wells
- SP 625S (625 gpm)
- SP 800S (800 gpm)
- SP 1100S (1100 gpm)
18. SP electrical data
19. Accessories
- MP 204
  - Applications
  - Benefits
- Control functions
- CU331SP constant pressure drive kits
  - Grundfos GO remote app and Grundfos GO CAPS
- Connecting pieces
  - Thread-to- thread
- Zinc anodes
- SA-SPM 6 control boxes
- Pt100
20. Energy consumption
- Energy consumption of submersible pumps
21. Cables
- Cable sizing charts
22. Friction loss tables
23. Grundfos Product Center

SP curve charts and technical data

SQ, SQE, CU 331, and SP

130

10" and larger wells - continued

SP 1100S (1100 gpm) / 6, 8, 10 inch motors

Notes:

Control box is required for 3-wire, single-phase applications. Data does not include control box.

Performance conforms to ISO 9906. 1999 (E) Annex A. Minimum submergence is 2 feet.

Pump model

Nom.

head

[ft]

Volts

[V]

Motor

[Hp]

Dimensions

Net weight

(complete)

[lb]

1100S

ABCDE

TM00 8760 3596

[in. (mm)] [in. (mm)] [in. (mm)] [in. (mm)] [in. (mm)]

1100S - Motor dia. 6 inch, 60 Hz, rated flow 1100 gpm (6" NPT)

1100S300-1A 67

3 230 30 ▲ 66.66 (1693) 35.56 (903) 31.11 (790) 5.63 (143) 9.30 (236) 261.0

3 460 30 ▲ 66.66 (1693) 35.56 (903) 31.11 (790) 5.63 (143) 9.30 (236) 261.0

1100S400-1 108 3 460 40 ▲ 71.38 (1813) 40.28 (1023) 31.11 (790) 5.63 (143) 9.30 (236) 290.6

1100S600-2AA 155 3 460 60 † - - 38.04 (966) - 9.30 (236) -

1100S - Motor dia. 8 inch, 60 Hz, rated flow 1100 gpm (6" NPT)

1100S400-1 108 3 460 40 * 74.81 (1900) 43.71 (1110) 31.11 (790) 7.56 (192) 9.41 (239) 407.2

1100S600-2AA 155 3 460 60 * 88.04 (2236) 50.00 (1270) 38.04 (966) 7.56 (192) 9.41 (239) 501.8

1100S750-2A 197 3 460 75 * 91.19 (2316) 53.15 (1350) 38.04 (966) 7.56 (192) 9.41 (239) 534.8

1100S1000-2 227 3 460 100 * 100.63 (2556) 62.60 (1590) 38.04 (966) 7.56 (192) 9.41 (239) 633.8

1100S1000-3AA 286 3 460 100 * 107.56 (2732) 62.60 (1590) 44.97 (1142) 7.56 (192) 9.41 (239) 655.9

1100S1250-3A 316 3 460 125 * 117.01 (2972) 72.05 (1830) 44.97 (1142) 7.56 (192) 9.41 (239) 757.1

1100S1250-3 346 3 460 125 * 117.01 (2972) 72.05 (1830) 44.97 (1142) 7.56 (192) 9.41 (239) 757.1

1100S1500-4AA 405 3 460 150 * 133.00 (3378) 81.11 (2060) 51.89 (1318) 7.56 (192) 9.41 (239) 889.1

1100S1500-4A 435 3 460 150 * 133.00 (3378) 81.11 (2060) 51.89 (1318) 7.56 (192) 9.41 (239) 889.1

1100S1500-4 465 3 460 150 * 133.00 (3378) 81.11 (2060) 51.89 (1318) 7.56 (192) 9.41 (239) 889.1

1100S1750-5AA 524 3 460 175 * - - 58.82 (1494) - 9.41 (239) -

1100S1750-5A 554 3 460 175 * - - 58.82 (1494) - 9.41 (239) -

E = Maximum diameter

of pump including

cable guard and motor.

1100S2000-5 584 3 460 200 * - - 58.82 (1494) - 9.41 (239) -

1100S - Motor dia. 10 inch, 60 Hz, rated flow 1100 gpm (6" NPT)

1100S1750-5AA 524 3 460 175 † 132.45 (3364) 73.63 (1870) 58.82 (1494) 9.34 (237) 9.85 (250) 1142.2

1100S1750-5A

-1800

554 3 460 175 † 132.45 (3364) 73.63 (1870) 58.82 (1494) 9.34 (237) 9.85 (250) 1137.0

1100S2000-5 584 3 460 200 † 140.32 (3564) 81.5 (2070) 58.82 (1494) 9.34 (237) 9.85 (250) 1285.2

1100S2500-6AA

-2600

703 3 460 250 † 160.24 (4070) 94.49 (2400) 65.75 (1670) 9.34 (237) 9.85 (250) 1478.0

1100S2500-6A

-2600

673 3 460 250 † 160.24 (4070) 94.49 (2400) 65.75 (1670) 9.34 (237) 9.85 (250) 1483.2

1100S2500-6

-2600

703 3 460 250 † 160.24 (4070) 94.49 (2400) 65.75 (1670) 9.34 (237) 9.85 (250) 1483.2

▲ MS 6000C motor.

* Takes MMS 8000 motor; not available as complete.

† Takes MMS 10000 motor; not available as complete.

B C

Rp 6

NPT