Product Manual
Table Of Contents
- 1. SQ, SQE introduction
- 2. SQ, SQE applications
- SQ with pressure switch and pressure tank
- Constant-pressure control with CU 301, residential water supply
- Constant-pressure control with CU 301, irrigation
- Maintaining a constant water table
- Emptying or filling a tank
- Pumping from one tank to another
- Setting of operating parameters
- SQE with manual speed control
- 3. Performance range
- 4. SQ, SQE installation
- 5. Sizing and selection
- 6. Cable sizing
- 7. SQ, SQE curve charts
- 8. SQ, SQE technical data
- 9. SQ, SQE construction
- 10. CU331SP variable frequency drive
- 11. Accessories
- 12. SP introduction
- 13. SP product overview
- 14. SP construction
- 15. SP operating conditions
- 16. How to read the curve charts
- 17. SP curve charts and technical data
- 4" and larger wells
- SP 5S (5 gpm)
- SP 7S (7 gpm)
- SP 10S (10 gpm)
- SP 16S (16 gpm)
- SP 25S (25 gpm)
- SP 35S (35 gpm)
- SP 45S (45 gpm)
- SP 62S (62 gpm)
- SP 77S (77 gpm)
- 6" and larger wells
- SP 85S (85 gpm)
- SP 150S (150 gpm)
- SP 230S (230 gpm)
- SP 300S (300 gpm)
- 8" and larger wells
- SP 385S (385 gpm)
- SP 475S (475 gpm)
- 10" and larger wells
- SP 625S (625 gpm)
- SP 800S (800 gpm)
- SP 1100S (1100 gpm)
- 18. SP electrical data
- 19. Accessories
- 20. Energy consumption
- 21. Cables
- 22. Friction loss tables
- 23. Grundfos Product Center
Accessories
SQ, SQE, CU 331, and SP
19
138
Connecting pieces
The tables below show the range of connecting pieces
for connection of thread-to-flange and
thread-to-thread.
Thread-to- thread
Fig. 73 Dimensional sketch and photo of connecting piece thread-to-thread
Zinc anodes
Application
Cathodic protection by means of zinc can be used for
corrosion protection of SP pumps in chloride-
containing liquids such as brackish water and
seawater.
Sacrificial anodes are placed on the outside of the
pump and motor as protection against corrosion.
The number of anodes required depends on the pump
and motor in question.
Please contact Grundfos for further details.
Liquid temperatures
• Seawater:
Up to 95 °F (35 °C).
• Brackish water (min. 1500 ppm (g/m
3
) chloride):
Up to 95 °F (35 °C).
Anode life
The zinc anodes have a life of one to four years,
depending on operating conditions (temperature, flow
and chloride content).
Product numbers of zinc anodes
TM01 2397 1698 - GrA2555
L
B
A
Type Connecting piece
Dimensions
Product number
Thread-to-thread
L
[in. (mm)]
A B 304 stainless steel 316 stainless steel
385S
475S
NPT 5 NPT 4 NPT 5 NPT 4 4.76 (121) 190064 190586
NPT 5 NPT 6 NPT 5 NPT 6 5.91 (150) 190070 190592
625S
800S
1100S
NPT 6 NPT 5 NPT 6 NPT 5 5.91 (150) 200135 200645
Zinc anodes for pumps
Product
number
Used for pump type
SP 5S to 77S
85S
150S
230S
300S
385S
475S
625S
800S
1100S
96421444 ● ---------
96421445 - ●●●● -----
96421447 - - - - - ●● ---
96421448 - - ----● ---
96421449 - - -----● --
96421450 - - -----●●●
Zinc anodes for motors
4" motors 6" motors 8" motors 10" motors
96421444 96421446 96421450 96564808