Product Manual

SQ, SQE construction
SQ, SQE, CU 331, and SP
9
31
R100 menus for CU 301
0. General
1. Operation
1.1 Setpoint setting
1.2 Selection of operating mode
1.3 Alarm indication.
2. Status
The indication of:
2.1 Actual operating mode
2.2 Actual pressure
2.3 Actual motor speed
2.4 Actual motor temperature
2.5 Actual power input and accumulated motor power
consumption
2.6 Accumulated number of operating hours and
accumulated number of starts.
3. Installation
3.1 Sensor parameters
3.2 Choice of sensor
3.3 Setting of maximum pressure setpoint
3.4 Setting of automatic restart time
3.5 Setting of the dry-running stop limit
3.6 Setting of the maximum motor speed
3.7 Setting of the cut-in motor speed
3.8 Activating or deactivating the on/off-button and
the buttons for system pressure setting on the
CU 301
3.9 Indication of pump operation
3.10 Allocation of identification number.