Product Manual
Table Of Contents
- 1. SQ, SQE introduction
- 2. SQ, SQE applications
- SQ with pressure switch and pressure tank
- Constant-pressure control with CU 301, residential water supply
- Constant-pressure control with CU 301, irrigation
- Maintaining a constant water table
- Emptying or filling a tank
- Pumping from one tank to another
- Setting of operating parameters
- SQE with manual speed control
- 3. Performance range
- 4. SQ, SQE installation
- 5. Sizing and selection
- 6. Cable sizing
- 7. SQ, SQE curve charts
- 8. SQ, SQE technical data
- 9. SQ, SQE construction
- 10. CU331SP variable frequency drive
- 11. Accessories
- 12. SP introduction
- 13. SP product overview
- 14. SP construction
- 15. SP operating conditions
- 16. How to read the curve charts
- 17. SP curve charts and technical data
- 4" and larger wells
- SP 5S (5 gpm)
- SP 7S (7 gpm)
- SP 10S (10 gpm)
- SP 16S (16 gpm)
- SP 25S (25 gpm)
- SP 35S (35 gpm)
- SP 45S (45 gpm)
- SP 62S (62 gpm)
- SP 77S (77 gpm)
- 6" and larger wells
- SP 85S (85 gpm)
- SP 150S (150 gpm)
- SP 230S (230 gpm)
- SP 300S (300 gpm)
- 8" and larger wells
- SP 385S (385 gpm)
- SP 475S (475 gpm)
- 10" and larger wells
- SP 625S (625 gpm)
- SP 800S (800 gpm)
- SP 1100S (1100 gpm)
- 18. SP electrical data
- 19. Accessories
- 20. Energy consumption
- 21. Cables
- 22. Friction loss tables
- 23. Grundfos Product Center
How to read the curve charts
SQ, SQE, CU 331, and SP
16
75
16. How to read the curve charts
TM05 0229 10112
0 1 2 3 4 5
Q [US GPM]
0.00
0.02
0.04
0.06
0.08
[hp]
P2
0
10
20
30
40
Eff
[%]
0.00
0.02
0.04
0.06
[kW]
P2
P2
Eff
0 1 2 3 4 5 6 7
Q [US GPM]
0
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
[ft]
H
0
50
100
150
200
250
300
350
400
[m]
H
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
Q [m³/h]
5S
ISO 9906 Annex A
60 Hz, SF 1.15
-13
-22
-18
-26
-39DS
-48DS
-31
-9
Number of stages.
First figure: number of stages;
second figure: number of
reduced-diameter impellers.
The efficiency curve shows
the efficiency of the pump.
The efficiency curve is an
average curve of all the
pump types shown in the
chart.
The efficiency of pumps with
reduced-diameter impellers
is approx. 2 % lower than the
efficiency curve shown in the
chart.
Pump type, number of
poles and frequency.
QH curve for the individual
pump. The bold curves
indicate the recommended
performance range for best
efficiency.
The power curves indicate
pump input power per stage.
Curves are shown for
complete (1/1) and for
reduced-diameter (2/3)
impellers.