Product Manual
Table Of Contents
- 1. SQ, SQE introduction
- 2. SQ, SQE applications
- SQ with pressure switch and pressure tank
- Constant-pressure control with CU 301, residential water supply
- Constant-pressure control with CU 301, irrigation
- Maintaining a constant water table
- Emptying or filling a tank
- Pumping from one tank to another
- Setting of operating parameters
- SQE with manual speed control
- 3. Performance range
- 4. SQ, SQE installation
- 5. Sizing and selection
- 6. Cable sizing
- 7. SQ, SQE curve charts
- 8. SQ, SQE technical data
- 9. SQ, SQE construction
- 10. CU331SP variable frequency drive
- 11. Accessories
- 12. SP introduction
- 13. SP product overview
- 14. SP construction
- 15. SP operating conditions
- 16. How to read the curve charts
- 17. SP curve charts and technical data
- 4" and larger wells
- SP 5S (5 gpm)
- SP 7S (7 gpm)
- SP 10S (10 gpm)
- SP 16S (16 gpm)
- SP 25S (25 gpm)
- SP 35S (35 gpm)
- SP 45S (45 gpm)
- SP 62S (62 gpm)
- SP 77S (77 gpm)
- 6" and larger wells
- SP 85S (85 gpm)
- SP 150S (150 gpm)
- SP 230S (230 gpm)
- SP 300S (300 gpm)
- 8" and larger wells
- SP 385S (385 gpm)
- SP 475S (475 gpm)
- 10" and larger wells
- SP 625S (625 gpm)
- SP 800S (800 gpm)
- SP 1100S (1100 gpm)
- 18. SP electrical data
- 19. Accessories
- 20. Energy consumption
- 21. Cables
- 22. Friction loss tables
- 23. Grundfos Product Center
SP curve charts and technical data
SQ, SQE, CU 331, and SP
17
88
4" and larger wells - continued
SP 35S (35 gpm) / 6 inch motor
Notes:
Control box is required for 3-wire, single-phase applications. Data does not include control box.
Performance conforms to ISO 9906. 1999 (E) Annex A. Minimum submergence is 2 feet.
▲ MS 6000C motor.
Pump
model
Nom.
head
[ft]
Ph
Volts
[V]
Motor
[Hp]
Dimensions
Net weight
(complete)
[lb]
35S
ABCDE
TM06 4962 3415
[in. (mm)] [in. (mm)] [in. (mm)] [in. (mm)] [in. (mm)]
35S - Motor dia. 6 inch, 60 Hz, rated flow 35 gpm (1 1/2" NPT)
35S75-22 487
3 208-230 7.5 ▲ 78.67 (1998) 23.51 (597) 55.16 (1401) 5.50 (140) 5.50 (140) 123.6
3 460 7.5 ▲ 78.67 (1998) 23.51 (597) 55.16 (1401) 5.50 (140) 5.50 (140) 123.6
3 575 7.5 ▲ 78.67 (1998) 23.51 (597) 55.16 (1401) 5.50 (140) 5.50 (140) 123.6
35S75-25 554
3 208-230 7.5 ▲ 84.57 (2148) 23.51 (597) 61.07 (1551) 5.50 (140) 5.50 (140) 127.5
3 460 7.5 ▲ 84.57 (2148) 23.51 (597) 61.07 (1551) 5.50 (140) 5.50 (140) 127.5
3 575 7.5 ▲ 84.57 (2148) 23.51 (597) 61.07 (1551) 5.50 (140) 5.50 (140) 127.5
35S75-28 621
3 208-230 7.5 ▲ 90.48 (2298) 23.51 (597) 66.97 (1701) 5.50 (140) 5.50 (140) 131.4
3 460 7.5 ▲ 90.48 (2298) 23.51 (597) 66.97 (1701) 5.50 (140) 5.50 (140) 131.4
3 575 7.5 ▲ 90.48 (2298) 23.51 (597) 66.97 (1701) 5.50 (140) 5.50 (140) 131.4
35S100-31 688
3 208-230 10 ▲ 97.56 (2478) 24.69 (627) 72.88 (1851) 5.50 (140) 5.50 (140) 142.0
3 460 10 ▲ 97.56 (2478) 24.69 (627) 72.88 (1851) 5.50 (140) 5.50 (140) 142.0
3 575 10 ▲ 97.56 (2478) 24.69 (627) 72.88 (1851) 5.50 (140) 5.50 (140) 142.0
35S100-34 755
3 208-230 10 ▲ 103.47 (2628) 24.69 (627) 78.78 (2001) 5.50 (140) 5.50 (140) 145.9
3 460 10 ▲ 103.47 (2628) 24.69 (627) 78.78 (2001) 5.50 (140) 5.50 (140) 145.9
3 575 10 ▲ 103.47 (2628) 24.69 (627) 78.78 (2001) 5.50 (140) 5.50 (140) 145.9
35S100-38 844
3 208-230 10 ▲ 111.34 (2828) 24.69 (627) 86.66 (2201) 5.50 (140) 5.50 (140) 151.1
E = Maximum diameter of
pump including cable
guard and motor.
3 460 10 ▲ 111.34 (2828) 24.69 (627) 86.66 (2201) 5.50 (140) 5.50 (140) 151.1
3 575 10 ▲ 111.34 (2828) 24.69 (627) 86.66 (2201) 5.50 (140) 5.50 (140) 151.1
NPT