Overview of Primary Product

Further product documentation

UP Series

WinCAPS

Fig. 17 WinCAPS CD-ROM

WinCAPS is a Windows-based Computer Aided

Product Selection program containing detailed informa-

tion on more than 185,000 Grundfos products in more

than 20 languages.

The program contains the same features and functions

as WebCAPS, but is an ideal solution if no Internet

connection is available.

WinCAPS is available on CD-ROM and updated once a

year.

Sizing

This section is based on different fields of application and installa-

tion examples, and gives easy step-by-step instructions in how to

• select the most suitable and efficient pump for your installation

• carry out advanced calculations based on energy consumption,

payback periods, load profiles, life cycle costs, etc.

• analyse your selected pump via the built-in life cycle cost tool

• determine the flow velocity in wastewater applications, etc.

Replacement

In this section you find a guide to selecting and comparing replace-

ment data of an installed pump in order to replace the pump with a

more efficient Grundfos pump.

The section contains replacement data of a wide range of pumps

produced by other manufacturers than Grundfos.

Based on an easy step-by-step guide, you can compare Grundfos

pumps with the one you have installed on your site. When you have

specified the installed pump, the guide will suggest a number of

Grundfos pumps which can improve both comfort and efficiency.

CAD drawings

In this section it is possible to download 2-dimensional (2D) and 3-

dimensional (3D) CAD drawings of most Grundfos pumps.

These formats are available in WebCAPS:

2-dimensional drawings:

• .dxf, wireframe drawings

• .dwg, wireframe drawings.

3-dimensional drawings:

• .dwg, wireframe drawings (without surfaces)

• .stp, solid drawings (with surfaces)

• .eprt, E-drawings.

UPSeries.book Page 73 Tuesday, September 18, 2007 1:01 PM