Submittal Sheet

TM058227
Fig. Correct pipe sizing for connection to the pump
inlet or outlet
Maximum system pressure
Make sure that the system in which the pump is installed
is designed for the maximum pump pressure.
The maximum inlet pressure depends on the head at the
actual duty point. The sum of the inlet pressure and the
head must not exceed the maximum system pressure.
We recommend installing a pressure-relief valve to protect
the pump so that the outlet pressure does not exceed the
maximum system pressure.
Installation examples
We recommend that you follow the installation examples.
Valves are not supplied with the pump.
Suction from a well (outdoor installation)
6
1
7
2
3
3
5
4
TM073984
Pos. Description
1 Highest faucet
2 Isolating valve
3 Pipe support
4 Pressure tank
5 Slight downward slope
6
Foot valve with strainer. The foot valve is optional. We recommend
using a foot valve with a JP PS installation.
7 Pump and tank cover
JP PS
3
9
Installation and operation