User's Manual

17
Installation
Auto Scan
1. Go to Main menu > Installation.
2. Press BLUE key to auto scan all the channels.
3. Press EXIT key if you want to stop during the auto
scan.
Manual Scan
1. Go to Main menu > Installation.
2. Press ▲▼ to select the channels you want to scan.
Press ◀▶ key to page up/down.
3. Press OK key to select the channel, press again to
cancel your selection. If the channel is selected, an
icon “YES” will appear.
4. Repeat step 2, 3 to select other channels.
5. Press RED key to start scanning the selected
channels.
6. Press EXIT key if you want to stop during the scan.